450-0019 LS Research, 450-0019 Datasheet - Page 13

• Manufacturer Part Number: 450-0019
• Description: Zigbee / 802.15.4 Modules SiFLEX02 Module RF Castellation
• Manufacturer: LS Research

Specifications of 450-0019

• Rohs: yes
• Frequency Band: 900 MHz
• Line Of Sight Range: 2 miles
• Data Rate: 1 Mbps
• Sensitivity: - 102 dBm
• Operating Supply Voltage: 2 V to 3.45 V
• Supply Current Transmitting: 285 mA
• Supply Current Receiving: 30 mA
• Output Power: 250 mW
• Antenna Connector Type: Off Board
• Maximum Operating Temperature: + 85 C
• Dimensions: 1.63 in x 0.9 in x 0.2 in
• Minimum Operating Temperature: - 40 C
• Factory Pack Quantity: 50

SiFLEX02 TRANSCEIVER MODULE
DATASHEET
Figure 6 AT86RF212 Block Diagram
RF Power Amplifier
The SiFLEX02 module contains a discrete high performance RF Front End for low-power and low-
voltage 900MHz wireless applications. It is capable of 250mW output power, providing miles of range
in outdoor applications.
The signals DIG3 and DIG4 from the RF212 radio are used for transmit enable (TXEN) and receive
enable (RXEN) respectively. When transmitting the DIG3 signal will be high and DIG4 will be low,
which is controlled by the RF212. When receiving DIG3 will be low and DIG4 is high. In order to
configure this functionality, the PA_EXT_EN bit in register TRX_CTRL_1 (0x04) of the RF212 needs to
be set as a one. In addition the bits PA_LT[1] and PA_LT[0] in register RF_CTRL_0 (0x16) should both
be set to one to maximize the PA lead time to 8usec.
When putting the module to sleep the PA_EXT_EN bit should be set as zero. Upon wakeup the
PA_EXT_EN should be set back to one.
The information in this document is subject to change without notice.
330-0009-R3.1
Copyright © 2009-2012 LS Research, LLC
Page 13 of 40