FEBFCM8531_B01H300A Fairchild Semiconductor, FEBFCM8531_B01H300A Datasheet - Page 11

• Manufacturer Part Number: FEBFCM8531_B01H300A
• Description: Power Management IC Development Tools 300W 3Phse PMSM/BLDC Motor Control Board
• Manufacturer: Fairchild Semiconductor
• Type: Motor / Motion Controllers & Driversr

Specifications of FEBFCM8531_B01H300A

• Rohs: yes
• Product: Devolopment Boards
• Input Voltage: 5 V
• Output Voltage: 2.5 V
• Description/function: Processor for motor control that consist of an advanced motor controller
• Interface Type: I2C, SPI, UART
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: -40 C
• Output Current: 29 mA
• For Use With: MCS51

© 2012 Fairchild Semiconductor Corporation
5.3. Applicable Power Range
5.4. Firmware Programming
The evaluation board and pre-programmed firmware are designed for a specific power
range. If different power rating is needed, a few components and the firmware may need
to be changed. In addition, the power capabilities of the AC-DC rectifier (including the
EMI filter), the SPM module, and the motor need to be reconsidered.
AC-DC: The maximum power this evaluation board can deliver for the motor is 300 W
at 220 V
This evaluation board is applicable for implementations below 300 W. For higher power,
use of an external power source must be considered to avoid damage to the on-board AC-
DC rectifier.
SPM®: The default SPM on this evaluation board is the FNB41060. In conjunction with
the example source code delivered with the evaluation board, it is able to drive a
brushless DC motor with power consumption below 300 W at 310 V
is needed, the SPM, R
rating. Two SPM packages are compatible with the FCM8531 evaluation board: the
SPM26L and SPM27L. Follow the link below for more information on applicable SPM
modules:
driver-devices.html.
The following link may be useful to simulate and determine which SPM module meets
specific power requirements:
http://www.fairchildsemi.com/design_tools/motion_control_design_tool/index.html
Motor: The power rating of the motor in the evaluation board kit is about 70 W at
310 V
starting current or stall current may damage the motor windings. If necessary, the
parameters of current protections should be revised to fit the requirements.
To program the firmware into the FCM8531, users must have the Motor Control
Development System (MCDS) Integrated Development Environment (IDE) and the
MCDS programming kit. For more detailed information about programming, please
refer to the
DC
. If a smaller motor is conncected to the board, pay attention to whether the
AC
input (measured at the three-phase output terminals of the evaluation board).
AN-8207 — User Guide for MCDS IDE.
http://www.fairchildsemi.com/applications/motor-control/integrated-motor-
SHUNT
, and the firmware may need to be changed to meet the power
11
FEBFCM8531_B01H300A • Rev. 1.0.1
DC
. If higher power