DS2778K Maxim Integrated, DS2778K Datasheet - Page 14

• Manufacturer Part Number: DS2778K
• Description: Power Management IC Development Tools
• Manufacturer: Maxim Integrated
• Series: DS2775, DS2776, DS2777, DS2778r

DS2775–DS2778 Evaluation Kits
The Net Address subtab allows the user to perform a
Search Net Address command to find all the 1-Wire
devices on the 1-Wire bus. All devices found on the
bus are listed in the Addresses fields. To communicate
to any device on the bus, click on its address inside the
Net Addresses field to select it. The program now uses
this net address for all operations until a different net
address is chosen. If a DS2776/DS2778 is detected,
then a separate button is displayed to allow the user to
read the ROM ID of the 2-wire device.
Figure 26. Memory Tab
14
______________________________________________________________________________________
The Log Data tab allows the user to see the
DS2775–DS2778’s real-time measurements graphed
over time (Figure 27). There are separate subtabs for
Voltage, Current, Temperature, and Accumulated
Charge. Each graph displays the last 500 data points
collected by the DS2775–DS2778 EV kit software. The
sampling interval can be adjusted from as fast as pos-
sible to 15min and can be adjusted from the Sampling
Interval menu at the bottom of the window. The Clear
Graphs button clears all data from all four graphs but
does not reset the log to file function. The graphs are
not updated when the fastest sampling interval is
selected, only the data logging is enabled.