SJ-3402 (BLACK) 5/8" 3M, SJ-3402 (BLACK) 5/8" Datasheet - Page 4

• Manufacturer Part Number: SJ-3402 (BLACK) 5/8"
• Description: HOOK PLAIN BACK 5/8" X 50YD BLK
• Manufacturer: 3M
• Series: Scotchmate™r

Specifications of SJ-3402 (BLACK) 5/8"

• Wire/cable Tie Type: Hook and Loop - Hook Strip
• Bundle Diameter: Variable
• Length: 150' (45.7m)
• Width: 0.625" (15.90mm)
• Mounting Type: Sew On
• Color: Black
• Tensile Strength: -
• Features: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Tensile Strength: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 2120062547; 21200625473; 70-0700-9518-0; 70070095180; SJ3402 (5/8") BLACK; SJ340258-0; SJ340258-0; SJ340258B-50

3M
Nylon Reclosable Fasteners
Typical Closure
Performance
Characteristics
Attachment
Techniques
TM
Scotchmate
The following information is intended to assist the designer considering the use of
3M™ Scotchmate™ Reclosable Fasteners. Final product performance depends on
actual conditions, including the fastener selected, the conditions in which the fastener
is applied and the time and environmental conditions in which it is expected to
perform. Because many of these factors are uniquely within the user’s knowledge and
control, it is required that the user evaluate the 3M product to determine whether it is
fit for a particular purpose and suitable for the user’s method of application and desired
end use.
As a general rule, four square inches of Scotchmate reclosable fastener area per pound
of static load to be supported is suggested as a starting point for evaluation. More or
less area may be needed depending on specific conditions or end use applications.
There are typically six different methods for attaching Scotchmate reclosable fasteners
to various surfaces.For complete details on techniques and options for attaching
fasteners, please see Attachment of 3M™ Scotchmate™ and Dual Lock™ Reclosable
Fasteners technical bulletin (70-0709-3929-6). The most important techniques for
these Scotchmate reclosable fastener products are summarized on page 5.
Note: The following technical information and data was collected under controlled
3M™ Scotchmate™ Reclosable Fasteners derive their strength from the area of
engagement as well as closure pressure. Vibration or side to side movement tends to
improve closure performance. Closure characteristics are indicated by typical values.
Closure Performance for plainback products
Dynamic T-Peel, lb./inch width (grams/cm width); ASTM D5170:
Dynamic Shear, pounds force/square inch (Newtons/cm
Dynamic Tensile, pounds force/square inch (Newtons/cm
a. 3M™ Scotchmate™ Reclosable Fastener Hook and Loop Products were disengaged at a rate of 12" (305 mm)/minute.
TM
laboratory conditions and should be considered representative or typical only and
should not be used for specification purposes.
- 4 -
a
2
); ASTM D5169:
2
):
2.6 (466)
10 (6.9)
Typical
8 (5.5)