PLT1M-M00 Panduit Corp, PLT1M-M00 Datasheet - Page 177
![CABLE TIE MINI WR BLK 3.9"](/photos/0/88/8838/plt_series_black_sml.jpg)
PLT1M-M00
Manufacturer Part Number
PLT1M-M00
Description
CABLE TIE MINI WR BLK 3.9"
Manufacturer
Panduit Corp
Series
PAN-TY®r
Type
Locking Cable Tier
Specifications of PLT1M-M00
Color
Black
Wire/cable Tie Type
Standard, Locking
Bundle Diameter
0.87" (22.10mm)
Length
0.325' (99.06mm, 3.90")
Width
0.098" (2.50mm)
Mounting Type
Free Hanging (In-Line)
Tensile Strength
18 lbs. (8.2 kg)
Features
Weather Resistant
Body Material
Nylon 6.6
Operating Temp Range
-40C to 85C
Product Length (mm)
99mm
Product Depth (mm)
4.6mm
Product Height (mm)
3.9mm
Maximum Bundle Diameter
0.87 in
Product
Cable Ties
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Abrasion Protection Products Flammability Tests and Classifications
Test samples of material, with dimension 125 ± 5mm by 13.0 ± 5mm and provided in the minimum and
maximum thickness of the intended end use product, are tested in an unconditioned (as manufactured)
state and in a conditioned state (7 days at 168F°, 75°C). The test requires the placement of a precisely
controlled flame under a vertically supported specimen for a 10 second period. The flame is removed and
the duration of flaming is recorded. If the flame extinguishes, the specimen is immediately subjected to a
second 10 second ignition period. Duration of flaming is again recorded. A piece of 100% cotton is placed
under the specimen. Also observed and documented is if the sample drips flaming particles that ignite the
cotton indicator below.
• Specimens shall have a maximum burn rate of <1.5"/min over 3" of thickness of 0.120" to 0.5"
• Specimens shall have a maximum burn rate of <3.0"/min over 3" for a thickness less than 0.120"
Samples of fully recovered tubing are placed over a length of fine spring steel music wire. The test
requires the precise placement of a controlled flame that contacts the heat shrink tubing. The flame is
applied in five fifteen second intervals with a time period between applications. If the flame extinguishes
immediately after the first flame removal, subsequent flame applications are made to the tubing. Duration
of specimen flaming is noted. A piece of surgical cotton is placed under the specimen. If a flaming or
glowing piece of tubing drips and ignites the cotton, this is also noted.
• Not flame or glow longer than 60 seconds following any of the five applications of the flame
• Not ignite or damage more than 25% of kraft paper flag that is placed around the top of the tubing
• Not have any specimens which drip flaming particles and ignite the surgical cotton located 9 1/2" below
the test specimen.
Criteria Conditions
Afterflame time for each individual specimen t
Total afterflame time for any condition set (t
5 specimens)
Afterflame plus afterglow time for each individual specimen
after the second flame application (t
Afterflame or afterglow of any specimen up to the
holding clamp
Cotton indicator ignited by flaming particles or drops
Flammability Tests and Classifications
MATERIALS CLASSIFIED AS VW-1 SHALL:
t
t
t
1
2
3
UL224 VERTICAL WIRE FLAME TEST
• A number of test procedures have been developed which can be
• Review the following classifications to find which category is
MATERIALS CLASSIFIED UL-94 HB
UL94 VERTICAL BURNING TEST
used for the evaluation and comparison of various materials to
support combustion
designed to suit your abrasion and protection applications
2
+t
3
)
Afterglow time after second flame application
Afterflame time after first flame application
Materials Classification
1
Afterflame time after flame application
plus t
1
or t
2
2
for the
≤10s
≤50s
≤30s
V-0
No
No
Most commonly used parts appear in BOLD.
≤250s
≤30s
≤60s
V-1
No
No
≤250s
≤30s
≤60s
V-2
Yes
No
177