AT17F16-30JU Atmel, AT17F16-30JU Datasheet - Page 3

• Manufacturer Part Number: AT17F16-30JU
• Description: IC FLASH CONFIG 16M 20PLCC
• Manufacturer: Atmel

Specifications of AT17F16-30JU

• Programmable Type: FLASH
• Memory Size: 16Mb
• Voltage - Supply: 2.97 V ~ 3.63 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-LCC (J-Lead)
• Density: 16Mb
• Interface Type: Serial (2-Wire)
• Frequency (max): 33MHz
• Write Protection: No
• Operating Supply Voltage (typ): 3.3V
• Package Type: PLCC
• Operating Temp Range: -40C to 85C
• Supply Current: 40mA
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 20
• For Use With: ATDH2225 - CABLE ISP FOR AT17ATDH2200E - CONFIGURATOR PROGRAM BOARD KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3. Block Diagram
4. Device Description
3392F–CNFG–2/08
PAGESEL0
PAGESEL1
PAGE_EN
READY
Config. Page
The control signals for the configuration memory device (CE, RESET/OE and CLK) interface
directly with the FPGA device control signals. All FPGA devices can control the entire configura-
tion process and retrieve data from the configuration device without requiring an external
intelligent controller.
The RESET/OE and CE pins control the tri-state buffer on the DATA output pin and enable the
address counter. When RESET/OE is driven Low, the configuration device resets its address
counter and tri-states its DATA pin. The CE pin also controls the output of the AT17F Series
Configurator. If CE is held High after the RESET/OE reset pulse, the counter is disabled and the
DATA output pin is tri-stated. When OE is subsequently driven High, the counter and the DATA
output pin are enabled. When RESET/OE is driven Low again, the address counter is reset and
the DATA output pin is tri-stated, regardless of the state of CE.
When the configurator has driven out all of its data and CEO is driven Low, the device tri-states
the DATA pin to avoid contention with other configurators. Upon power-up, the address counter
is automatically reset.
Power-on
Memory
Select
Reset
Flash
CE/WE/OE
Address
Reset
Data
2-wire Serial Programming
Serial Download Logic
Control Logic
Clock/Oscillator
Logic
AT17F16
CLK
CEO(A2)
DATA
CE
RESET/OE
SER_EN
3