NCP1212P ON Semiconductor, NCP1212P Datasheet - Page 18

no-image

NCP1212P

Manufacturer Part Number
NCP1212P
Description
IC CTRLR PWM PROG CM OVP 8DIP
Manufacturer
ON Semiconductor
Type
PWM Controller for Both Forward and Flyback Convertersr
Datasheet

Specifications of NCP1212P

Output Isolation
Isolated
Operating Temperature
-40°C ~ 150°C
Package / Case
8-DIP (0.300", 7.62mm)
Input Voltage Range
- 0.3 V to + 28 V
Operating Temperature Range
- 40 C to + 150 C
Mounting Style
Through Hole
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
NCP1212POS

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
NCP1212PG
Quantity:
10
in Figure 42. From the captured waveforms, it can be noted
that the Brownout Input Threshold Voltage is 1.21 V and
Brownout Hysteresis Voltage is 1.36 V at BOK pin.
Experimental results for the Brownout action were shown
4. Improving Light Load and No Load Regulation for
High Power Applications
For high power applications, limited by the dynamic
range of the control circuitry, i.e. the control
feedback is limited by the swing of the optocoupler.
When V
conditions, it no longer has the means to further
reduce that voltage because of the saturation of the
optocoupler. At light load or no load conditions, the
primary current is very small and as the current
FB
reaches about 0.1 V at light load
Channel 1: The MOSFET’s V
Channel 2: Primary Bulk Capacitor Voltage
Channel 3: BOK Pin Voltage
Figure 42. Brownout Detect Waveforms
http://onsemi.com
18
DS
Switching Waveform
sensing resistor is also small for high power
applications, the current sense feedback voltage will
be much smaller than 0.1 V. Consequently, the
control will force to acquire maximum Duty Cycle
operation and the output will increase without
control.
In order to improve the poor regulation at light load,
a small circuit is added as shown in Figure 43. With
the additional circuitry, when V
Q2 will drive additional offset current to CS pin and
modify the current sensing voltage, V
higher than 0.1 V at normal load operation, Q2 will
be turned off due to limited V
be .
FB
falls below 0.1 V,
CS
. For V
FB

Related parts for NCP1212P