CS5467-ISZ Cirrus Logic Inc, CS5467-ISZ Datasheet - Page 5

• Manufacturer Part Number: CS5467-ISZ
• Description: IC ENERGY METERING 1PHASE 28SSOP
• Manufacturer: Cirrus Logic Inc

Specifications of CS5467-ISZ

• Package / Case: 28-SSOP
• Input Impedance: 30 KOhm
• Measurement Error: 0.1%
• Voltage - I/o High: 0.8V
• Voltage - I/o Low: 0.2V
• Current - Supply: 3.5mA
• Voltage - Supply: 4.75 V ~ 5.25 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Meter Type: Single Phase
• Output Voltage Range: 2.4 V to 2.6 V
• Input Voltage Range: 2.4 V to 2.6 V
• Input Current: 100 nA
• Power Dissipation: 500 mW
• Operating Temperature Range: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1555 - BOARD EVAL FOR CS5467 ADC
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1197-5

CS5467
1. OVERVIEW
The CS5467 is a CMOS power measurement integrated circuit utilizing four ∆Σ analog-to-digital convert-
ers to measure two line voltages and two currents. Optionally, voltage2 channel can be used for temper-
ature measurement. It calculates active, reactive, and apparent power as well as RMS and peak voltage
and current. It handles other system-related functions, such as pulse output conversion, voltage sag, cur-
rent fault, voltage zero crossing, line frequency, and voltage tamper correction.
The CS5467 is optimized to interface to current transformers or shunt resistors for current measurement,
and to resistive dividers or voltage transformers for voltage measurement. Two full-scale ranges are pro-
vided on the current inputs to accommodate both types of current sensors. The CS5467’s four differential
inputs have a common-mode input range from analog ground (AGND) to the positive analog supply
(VA+).
An additional analog input (PFMON) is provided to allow the application to determine when a power failure
is in progress. By monitoring the unregulated power supply, the application can take any required action
when a power loss occurs.
An on-chip voltage reference (nominally 2.5 volts) is generated and provided at analog output, VREFOUT.
This reference can be supplied to the chip by connecting it to the reference voltage input, VREFIN. Alter-
natively, an external voltage reference can be supplied to the reference input.
Three digital outputs (E1, E2, E3) provide a variety of output signals and, depending on the mode select-
ed, provide energy pulses, power failure indication, or other choices.
2
The CS5467 includes a three-wire serial host interface to an external microcontroller or serial E
PROM.
Signals include serial data input (SDI), serial data output (SDO), serial clock (SCLK), and optionally a chip
select (CS), which allows the CS5467 to share the SDO signal with other devices. A MODE input is used
2
to control whether an E
PROM will be used instead of a host microcontroller.
DS714F1
5