MAX6967ATE+ Maxim Integrated Products, MAX6967ATE+ Datasheet - Page 21

• Manufacturer Part Number: MAX6967ATE+
• Description: IC LED DRIVER LINEAR 16-TQFN
• Manufacturer: Maxim Integrated Products
• Type: Linear (Serial Interface)r

Specifications of MAX6967ATE+

• Constant Current: Yes
• Topology: Open Drain, PWM
• Number Of Outputs: 10
• Internal Driver: Yes
• Type - Primary: Backlight
• Type - Secondary: RGB, White LED
• Frequency: 270kHz ~ 450kHz
• Voltage - Supply: 2.25 V ~ 3.6 V
• Voltage - Output: 7V
• Mounting Type: Surface Mount
• Package / Case: 16-TQFN Exposed Pad
• Operating Temperature: -40°C ~ 125°C
• Current - Output / Channel: 20mA
• Internal Switch(s): Yes
• Number Of Segments: 10
• Low Level Output Current: 21.1 mA
• Operating Supply Voltage: 2.25 V to 3.6 V
• Maximum Supply Current: 730 uA
• Maximum Power Dissipation: 1176 mW
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Efficiency: -
• Lead Free Status / Rohs Status: Details

The MAX6966/MAX6967 communicate through an SPI-
compatible 4-wire serial interface. The interface has
three inputs: clock (SCLK), chip select (CS), and data
in (DIN), and one output, data out (DOUT). CS must be
low to clock data into or out of the device, and DIN
must be stable when sampled on the rising edge of
SCLK. DOUT is stable on the rising edge of SCLK.
Note that the SPI protocol expects DOUT to be high
impedance when the MAX6966/MAX6967 are not being
accessed; DOUT on the MAX6966/MAX6967 is never
high impedance. Go to www.maxim-ic.com/an1879 for
ways to convert the MAX6966/MAX6967 to tri-state,
if required.
SCLK and DIN can be used to transmit data to other
peripherals. The MAX6966/MAX6967 ignore all activity
on SCLK and DIN except when CS is low.
Table 11. Serial-Data Format
Figure
D15
R/W
8. MAX6966/MAX6967 Multiple CS Connection
10-Port Constant-Current LED Drivers and I/O
MSB
D14
D13
______________________________________________________________________________________
µC
Expanders with PWM Intensity Control
D12
MOSI
SCLK
CS3
CS2
CS1
ADDRESS
Serial Interface
D11
D10
CS1
DIN
SCLK
MAX6966
MAX6967
D9
LSB
D8
MSB
Controlling the MAX6966/MAX6967 requires sending a
16-bit word. The first byte, D15 through D8, is the com-
mand, and the second byte, D7 through D0, is the data
byte
Multiple MAX6966/MAX6967s can be interfaced to a
common SPI bus by connecting DIN inputs together,
connecting SCLK inputs together, and providing an
individual CS per MAX6966/MAX6967 device
8). This connection works regardless of the configura-
tion of DOUT/OSC, but does not allow the MAX6966/
MAX6967s to be read.
D7
Connecting Multiple MAX6966/MAX6967s
CS2
DIN
SCLK
Control and Operation Using the 4-Wire
(Table
D6
MAX6966
MAX6967
11).
D5
D4
DATA
CS3
DIN
SCLK
D3
to the 4-Wire Bus
MAX6966
MAX6967
D2
D1
Interface
(Figure
LSB
D0
21