STMPS2252MTR STMicroelectronics, STMPS2252MTR Datasheet - Page 35

• Manufacturer Part Number: STMPS2252MTR
• Description: IC HIGH SIDE SWITCH 500MA 8SOIC
• Manufacturer: STMicroelectronics
• Type: High Side Switchr

Specifications of STMPS2252MTR

• Number Of Outputs: 2
• Rds (on): 115 mOhm
• Internal Switch(s): Yes
• Current Limit: 500mA
• Voltage - Input: 2.7 ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• On Resistance (max): 160 mOhms
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Number Of Switches: Dual
• Off Time (max): 10 ms
• On Time (max): 5 ms
• Supply Current: 13 uA
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10387-2

STMPS2242, STMPS2252, STMPS2262, STMPS2272
7
7.1
Application information
Input and output capacitors
Input and output capacitors improve the performance of the device; the actual capacitance
should be optimized for the particular application. For all applications, a 0.1 µF or greater
ceramic bypass capacitor between IN and GND as close to the device as possible is
recommended for local noise decoupling. This precaution also reduces ringing on the input
due to power supply transients.
An additional capacitor may be needed on the input to reduce input voltage overshoots from
exceeding the absolute maximum voltage of the device during heavy transient conditions.
This is especially important during bench testing when long, inductive cables are used to
connect the evaluation board to the bench power supply. The value of 100 µF may be
adequate in most situations.
An output capacitor is not required for device functionality, but placing a high-value (in the
order of 10 - 100 µF) electrolytic capacitor on the output pins is recommended when large
transient currents are expected on the output.
Doc ID 15050 Rev 3
Application information
35/42