DS1722S+T&R Maxim Integrated Products, DS1722S+T&R Datasheet - Page 9

• Manufacturer Part Number: DS1722S+T&R
• Description: IC THERMOMETER DIG 3-WIRE 8-SOIC
• Manufacturer: Maxim Integrated Products

Specifications of DS1722S+T&R

• Function: Thermometer, Thermostat
• Topology: ADC, Register Bank
• Sensor Type: Internal
• Sensing Temperature: -55°C ~ 120°C
• Output Type: SPI™
• Output Alarm: No
• Output Fan: No
• Voltage - Supply: 2.65 V ~ 5.5 V
• Operating Temperature: -55°C ~ 120°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Full Temp Accuracy: +/- 3 C
• Digital Output - Bus Interface: Serial (3-Wire, SPI)
• Digital Output - Number Of Bits: 12 bit
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DS1722S+TR

DS1722
3-WIRE SERIAL DATA BUS
The 3-wire communication mode operates similar to the SPI mode. However, in 3-wire mode, there is
one bi-directional I/O instead of separate data in and data out signals. The 3-wire consists of the I/O (SDI
and SDO pins tied together), CE, and SCLK pins. In 3-wire mode, each byte is shifted in LSB first
unlike SPI mode where each byte is shifted in MSB first. As is the case with the SPI mode, an address
byte is written to the device followed by a single data byte or multiple data bytes. Figure 7 illustrates a
read and write cycle. Figure 8 illustrates a multiple byte burst transfer. In 3-wire mode, data is input on
the rising edge of SCLK and output on the falling edge of SCLK.
3-WIRE SINGLE BYTE TRANSFER Figure 7
3-WIRE MULTIPLE BYTE BURST TRANSFER Figure 8
9 of 14