AD680ANZ Analog Devices Inc, AD680ANZ Datasheet - Page 4

• Manufacturer Part Number: AD680ANZ
• Description: IC VREF PREC 2.5V LP 8-DIP
• Manufacturer: Analog Devices Inc
• Type: Voltage Referencer

Specifications of AD680ANZ

• Temperature Coefficient: 20ppm/°C
• Reference Type: Series
• Voltage - Output: 2.5V
• Tolerance: ±0.2%
• Voltage - Input: 4.5 ~ 36 V
• Number Of Channels: 1
• Current - Quiescent: 250µA
• Current - Output: 50mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Topology: Series
• Input Voltage: 4.5V To 36V
• Reference Voltage: 2.5V
• Reference Voltage Tolerance: 5mV
• Voltage Reference Case Style: DIP
• No. Of Pins: 8
• Current, Output: 0 to 10 mA
• Current, Supply: 195 μA
• Package Type: PDIP-8
• Power Dissipation: 1 mW
• Regulation, Line: 40 μV/V
• Regulation, Load: 80 μV/mA
• Regulator Type: Switching
• Temperature, Operating, Range: -40 to +85 °C
• Voltage, Input: 5 V
• Voltage, Noise: 8 μVp-p
• Voltage, Output: 2.5 V
• Voltage, Supply: 4.5 to 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Cathode: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

AD680
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
V
Power Dissipation (25°C)
Storage Temperature
Lead Temperature (Soldering, 10 sec)
Package Thermal Resistance θ
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
IN
to Ground
JA
(All Packages)
Rating
36 V
500 mW
−65°C to +125°C
300°C
120°C/W
Rev. H | Page 4 of 12
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
OUTPUT PROTECTION
Output safe for indefinite short to GND and momentary short
to −V
IN
.