CKCA43X7R1H102M TDK Corporation, CKCA43X7R1H102M Datasheet - Page 14

• Manufacturer Part Number: CKCA43X7R1H102M
• Description: CAP 4-ARRAY 1000PF 50V X7R 1206
• Manufacturer: TDK Corporation
• Series: CKCr
• Type: Ceramicr

Specifications of CKCA43X7R1H102M

• Capacitance: 1000pF
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Package / Case: 1206 (3216 Metric)
• Voltage - Rated: 50V
• Dielectric Material: Ceramic
• Number Of Capacitors: 4
• Circuit Type: Isolated
• Mounting Type: Surface Mount
• Height: 0.043" (1.10mm)
• Size / Dimension: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Voltage Rating: 50 Volts
• Number Of Elements: 4
• Operating Temperature Range: - 55 C to + 125 C
• Termination Style: SMD/SMT
• Dimensions: 3.2 mm L x 1.6 mm W x 2 mm H
• Product: Ceramic Capacitor Arrays
• Capacitance Tolerance: ± 20%
• No. Of Elements: 4
• Capacitor Case Style: 1206
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• No. Of Capacitors: 4
• Tolerance (+ Or -): 20%
• Voltage: 50VDC
• Number Of Terminals: 8Terminal
• Temp Coeff (dielectric): X7R
• Operating Temp Range: -55C to 125C
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Failure Rate: Not Required
• Product Height (mm): 1.1mm
• Product Depth (mm): 1.6mm
• Product Length (mm): 3.2mm
• Lead Diameter (nom): Not Requiredmm
• Terminal Pitch: 0.8mm
• Dielectric Characteristic: X7R
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 445-1851-2

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // CKC Series — Array Type Capacitors // Version A11
No.
14
15
*As for the initial measurement of capacitors (Class2) on number 8, 11, 12 and 13, leave capacitor at 150 —10, 0°C for 1
hour and measure the value after leaving capacitor for 24±2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X5R: 200% of initial spec. max.
500MΩ min. (As for the capacitors of
rated voltage 16, 10, 6.3V DC,
5MΩ•μF min.)
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X5R: 200% of initial spec. max.
1,000MΩ min. (As for the capacitors of
rated voltage 16, 10, 6.3V DC,
10MΩ•μF min.)
Characteristics
Class 1
Class 2
Rated
Capacitance
30pF and over
Under 30pF
Characteristics
Class 1
Class 2
Rated
Capacitance
30pF and over
10pF and over
under 30pF
Under 10pF
C0G
C0G
X5R
X7R
X5R
X7R
C : Rated capacitance (pF)
C : Rated capacitance (pF)
CKC Series — Array Type Capacitors
Change from the
value before test
±7.5%
± 25 %
Q
200 min.
100+10/3×C min.
Change from the
value before test
± 3%
± 25 %
Q
350 min.
275+5/2×C min.
200+10×C min.
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2):
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
Below the voltage shall be applied at 125±2ºC for
1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning:
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.