L6728DTR STMicroelectronics, L6728DTR Datasheet - Page 9

• Manufacturer Part Number: L6728DTR
• Description: IC PWM CTLR 1PH POWERGOOD 10DFN
• Manufacturer: STMicroelectronics

Specifications of L6728DTR

• Pwm Type: Voltage Mode
• Number Of Outputs: 1
• Frequency - Max: 330kHz
• Duty Cycle: 80%
• Voltage - Supply: 5 V ~ 12 V
• Buck: Yes
• Boost: No
• Flyback: No
• Inverting: No
• Doubler: No
• Divider: No
• Cuk: No
• Isolated: No
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 10-DFN
• Frequency-max: 330kHz
• Duty Cycle (max): 80 %
• Mounting Style: SMD/SMT
• Switching Frequency: 300 KHz
• Operating Supply Voltage: 5 V to 12 V
• Supply Current: 6 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10432-2

L6728D
5
Device description
The L6728D is a single-phase PWM controller with embedded high-current drivers which
provides complete control logic and protection features for easy implementation of a general
DC-DC step-down converter. Designed to drive N-channel MOSFETs in a synchronous
buck topology, this 10-pin device provides a high level of integration to allow a reduction in
cost and size of power supply solutions, while also providing real-time PGOOD in a compact
DFN10 3x3 mm package.
The L6728D is designed to operate from a 5 V or 12 V supply. The output voltage can be
precisely regulated to as low as 0.8 V with ±0.8% accuracy over line and temperature
variations. The switching frequency is internally set to 300 kHz.
This device provides a simple control loop with a voltage-mode error amplifier. The error
amplifier features a 15 MHz gain-bandwidth product and 8 V/µs slew rate, allowing high
regulator bandwidth for fast transient response.
To prevent load damage, the L6728D provides protection against overcurrent, overvoltage,
undervoltage and feedback disconnection. The overcurrent trip threshold is programmable
using a resistor connected from Lgate to GND. Output current is monitored across the low-
side MOSFET R
resistors. Output voltage is monitored through the dedicated VSEN pin.
The L6728D implements soft-start by increasing the internal reference in closed-loop
regulation. The low side-less feature allows the device to perform soft-start over a pre-
biased output, avoiding high current return through the output inductor and dangerous
negative spike at the load side.
The L6728D is available in a compact DFN10 3x3 mm package with exposed pad.
DS(on)
, eliminating the need for expensive and space-consuming sense
Doc ID 16498 Rev 1
Device description
9/33