S-1701A3025-M5T1G Seiko Instruments, S-1701A3025-M5T1G Datasheet - Page 47
![no-image](/images/manufacturer_photos/0/5/590/seiko_instruments_sml.jpg)
S-1701A3025-M5T1G
Manufacturer Part Number
S-1701A3025-M5T1G
Description
IC DETECT/REG 400MA 3.0V SOT23-5
Manufacturer
Seiko Instruments
Datasheet
1.S-1701A1815-M5T1G.pdf
(71 pages)
Specifications of S-1701A3025-M5T1G
Applications
Converter, Battery Powered Devices
Voltage - Input
2 ~ 6.5 V
Number Of Outputs
1
Voltage - Output
3V
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
SOT-23-5, SC-74A, SOT-25
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Rev.3.0
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION
• Wiring patterns for the VIN, VOUT and GND pins should be designed so that the impedance is low. When mounting an
• Note that the output voltage may increase when a series regulator is used at low load current (1.0 mA or less).
• Generally, a series regulator may cause oscillation depending on the selection of external parts. The following
• The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitor is small or
• The application conditions for the input voltage, output voltage, and load current should not exceed the package power
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
• In determining the output current, attention should be paid to the output current value specified in Tables 26 to 31 in the
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including
Precautions
output capacitor between the VOUT and VSS pins (C
VSS pins (C
conditions are recommended for this IC. However, be sure to perform sufficient evaluation under the actual usage
conditions for selection, including evaluation of temperature characteristics.
an input capacitor is not connected.
dissipation.
protection circuit.
electrical characteristics and footnote *7 of the table.
this IC of patents owned by a third party.
Input capacitor (C
Output capacitor (C
Equivalent series resistance (ESR): 10 Ω or less
_00
IN
), the distance from the capacitors to these pins should be as short as possible.
IN
):
L
):
1.0 μF or more
1.0 μF or more
Seiko Instruments Inc.
L
) and a capacitor for stabilizing the input between the VIN and
S-1701 Series
47