L5983TR STMicroelectronics, L5983TR Datasheet - Page 14

• Manufacturer Part Number: L5983TR
• Description: IC REG SW 1.5A STEPDOWN 8-VFQFPN
• Manufacturer: STMicroelectronics
• Type: Step-Down (Buck)r

Specifications of L5983TR

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 0.6 ~ 18 V
• Current - Output: 1.5A
• Frequency - Switching: 250kHz ~ 1MHz
• Voltage - Input: 2.9 ~ 18 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-VFQFN, 8-VFQFPN
• Power - Output: 1.5W
• For Use With: 497-6386 - BOARD EVAL FOR L5983
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6860-2; L5983TR

Functional description
4.5
4.6
14/43
Figure 8.
Inhibit function
The inhibit feature allows the device to be put into standby mode. With the INH pin higher
than 1.9 V, the device is disabled and the power consumption is reduced to less than 30 μA.
With the INH pin lower than 0.6 V, the device is enabled. If the INH pin is left floating, an
internal pull-up ensures that the voltage at the pin reaches the inhibit threshold and the
device is disabled. The pin is also V
Hysteretic thermal shutdown
The thermal shutdown block generates a signal that turns off the power stage if the junction
temperature goes above 150 °C. Once the junction temperature goes back to about 130 °C,
the device restarts in normal operation. The sensing element is very close to the PDMOS
area, therefore ensuring an accurate and fast temperature detection.
Overcurrent protection strategy
Doc ID 13005 Rev 7
CC
compatible.
L5983