MCP2036-I/P Microchip Technology, MCP2036-I/P Datasheet - Page 6

• Manufacturer Part Number: MCP2036-I/P
• Description: IC KEYLESS ENTRY AFE 14-PDIP
• Manufacturer: Microchip Technology
• Type: Sensor Interfacer

Specifications of MCP2036-I/P

• Package / Case: 14-DIP (0.300", 7.62mm)
• Applications: Analog I/O
• Mounting Type: Through Hole
• Product: Analog Front End
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Supply Current: 6.8 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Number Of Channels: 1
• Clock Frequency Max: 2MHz
• Slew Rate: 0.6V/µs
• Turn On Time: 4µs
• Sensor Case Style: DIP
• Operating Temperature Range: -40°C To +85°C
• No. Of Pins: 14
• Rohs Compliant: Yes
• Supply Voltage Range: 2.7 To 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP2036
2.8
The analog input to the coil driver. The triangular
waveform applied to this input should be in phase with
the clock signal for best performance.
2.9
Driver output used to excite the sensor coils. It is a
current-mode output designed to drive small inductive
loads.
2.10
The amplifier/filter output from the detector. This is a
low-impedance analog output pin (V
microcontroller ADC. The detector output is rail-to-rail.
DS22186C-page 6
Inductor Driver Input (DRVIN)
Inductor Driver Output (DRVOUT)
Detector Output Voltage (V
OUT
) for driving the
DETOUT
)
2.11
The non-inverting and inverting inputs for the
amplifier/filter op amp. The two inputs are connected to
the output of the mixer circuit through two internal
10KΩ resistors.
Inputs for Output Detector (V
V
DET-
)
© 2009 Microchip Technology Inc.
DET+
,