KS8993M Micrel Inc, KS8993M Datasheet - Page 44

• Manufacturer Part Number: KS8993M
• Description: IC SWITCH 10/100 3PORT 128PQFP
• Manufacturer: Micrel Inc

Specifications of KS8993M

• Applications: *
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII/SNI
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 1.89/3.465V
• Operating Supply Voltage (min): 1.71/3.135V
• Power Dissipation: 800mW
• Supply Current: 0.1/0.19A
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1013 - BOARD EVAL EXPERIMENT KS8993M
• Lead Free Status / RoHS Status: Not Compliant, Lead free / RoHS Compliant

MII Management (MIIM) Registers
The MIIM interface is used to access the MII PHY registers defined in this section. The SPI, I
interfaces can also be used to access these registers. The latter three interfaces use a different mapping
mechanism than the MIIM interface.
As defined in the IEEE 802.3 specification, the “PHYAD” are assigned as “0x1” for PHY port 1 and “0x2” for PHY
port 2. The “REGAD” supported are 0,1,2,3,4, and 5.
Register 0: MII Basic Control
Bit
15
14
13
12
11
10
9
8
7
6
5
4
Micrel, Inc.
April 2005
Name
Soft reset
Loopback
Force 100
AN enable
Power down
Isolate
Restart AN
Force full
duplex
Collision test
Reserved
Reserved
Force MDI
Register Number
0x0
0x1
0x2
0x3
0x4
0x5
0x6 – 0x1F
R/W
RO
R/W
R/W
R/W
R/W
RO
R/W
R/W
RO
RO
RO
R/W
Description
NOT SUPPORTED
=1, Loopback mode
=0, Normal operation
=1, 100 Mbps
=0, 10 Mbps
=1, Auto-negotiation enabled
=0, Auto-negotiation disabled
=1, Power down
=0, Normal operation
NOT SUPPORTED
=1, Restart auto-negotiation
=0, Normal operation
=1, Full duplex
=0, Half duplex
NOT SUPPORTED
=1, Force MDI (transmit on RXP / RXM pins)
=0, Normal operation (transmit on TXP / TXM
pins)
Description
Basic Control Register
Basic Status Register
Physical Identifier I
Physical Identifier II
Auto-Negotiation Advertisement Register
Auto-Negotiation Link Partner Ability Register
Not supported
44
Default
0
0
0
1
0
0
0
0
0
0
0
0
Reference
Reg. 29, bit 0
Reg. 45, bit 0
Reg. 28, bit 6
Reg. 44, bit 6
Reg. 29, bit 3
Reg. 45, bit 3
Reg. 29, bit 5
Reg. 45, bit 5
Reg. 28, bit 5
Reg. 44, bit 5
Reg. 29, bit 1
Reg. 45, bit 1
KS8993M/ML/MI
M9999-041205
2
C, and SMI