PC817XJ0000F Sharp Microelectronics, PC817XJ0000F Datasheet - Page 11

PHOTOCOUPLER TRAN OUT 4-DIP

PC817XJ0000F

Manufacturer Part Number
PC817XJ0000F
Description
PHOTOCOUPLER TRAN OUT 4-DIP
Manufacturer
Sharp Microelectronics
Datasheet

Specifications of PC817XJ0000F

Number Of Channels
1
Input Type
DC
Voltage - Isolation
5000Vrms
Current Transfer Ratio (min)
50% @ 5mA
Current Transfer Ratio (max)
600% @ 5mA
Voltage - Output
80V
Current - Output / Channel
50mA
Current - Dc Forward (if)
50mA
Vce Saturation (max)
200mV
Output Type
Transistor
Mounting Type
Through Hole
Package / Case
4-DIP
Configuration
1
Maximum Collector Emitter Voltage
80 V
Maximum Collector Emitter Saturation Voltage
200 mV
Isolation Voltage
5000 Vrms
Current Transfer Ratio
600 %
Maximum Forward Diode Voltage
1.4 V
Maximum Collector Current
50 mA
Maximum Power Dissipation
200 mW
Maximum Operating Temperature
+ 100 C
Minimum Operating Temperature
- 30 C
Forward Current
5 mA
Maximum Fall Time
18 us
Maximum Input Diode Current
50 mA
Maximum Reverse Diode Voltage
6 V
Maximum Rise Time
18 us
Output Device
Transistor
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
425-2427-5
● Cleaning instructions
● Presence of ODC
Solvent cleaning:
Ultrasonic cleaning:
Recommended solvent materials:
Solvent temperature should be 45˚C or below Immersion time should be 3 minutes or less
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this product.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
•Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated di-
phenyl ethers (PBDE).
11
PC817XJ0000F Series
Sheet No.: D2-A03102EN

Related parts for PC817XJ0000F