NHD-0216K1Z-NS(RGB)-FBW-REV1 Newhaven Display, NHD-0216K1Z-NS(RGB)-FBW-REV1 Datasheet - Page 4

• Manufacturer Part Number: NHD-0216K1Z-NS(RGB)-FBW-REV1
• Description: LCD MOD CHAR 16X2 RGB TRANSM
• Manufacturer: Newhaven Display

Specifications of NHD-0216K1Z-NS(RGB)-FBW-REV1

• Display Type: FSTN - Film Super-Twisted Nematic
• Display Mode: Transmissive
• Number Of Digits/alpha: 32
• Outline L X W X H: 80.00mm x 36.00mm x 9.50mm
• Viewing Area: 64.50mm L x 16.40mm W
• Backlight: LED - Red/Green/Blue
• Display Format: 16 x 2
• Character Size: 5.23mm H x 3.00mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 4.7 V ~ 5.5 V
• Dot Size: 0.56mm W x 0.61mm H
• Interface: Parallel
• Operating Temperature: -10°C ~ 50°C
• Character Count X Line: 16 x 2
• Module Size (w X H X T): 80 mm x 36 mm x 13 mm
• Features: RGB Backlight
• Fluid Type: FSTN Negative
• Background Color: Red / Green / Blue
• Voltage Rating: 4.7 V to 5.5 V
• Operating Temperature Range: - 20 C to + 70 C
• For Use With: NHDEV - BOARD DEV LCD COG TFT 100X95MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Pin Description and Wiring Diagram
Pin No. Symbol
Recommended LCD connector: 2.54mm pitch 1x18 pin header
Backlight connector: Pins 15‐18 of LCD connector Mates with: ‐
11‐14
7‐10
15
16
17
18
1
2
3
4
5
6
LED‐GREEN
DB0 – DB3
DB4 – DB7
LED‐BLUE
LED‐RED
LED‐
V
R/W
V
V
RS
E
SS
DD
0
External
Connection
Adj. Power Supply Power supply for contrast (approx. 0.5V)
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
MPU
MPU
MPU
MPU
MPU
Function Description
Ground
Power supply for logic (+5.0V)
Register select signal RS=1: DATA RS=0: COMMAND
Read/Write select signal RW=1: READ RW=0: WRITE
Operation enable signal Falling Edge Triggered
Four low order bi‐directional three‐state data bus lines.
These four are not used during 4‐bit operation
Four high order bi‐directional three‐state data bus lines.
Ground for Backlight
Power supply for backlight (2.2V)
Power supply for backlight (3.3V)
Power supply for backlight (3.3V)
[4]