NHD-0240AZ-FL-YBW Newhaven Display, NHD-0240AZ-FL-YBW Datasheet - Page 21

LCD MOD CHAR 2X40 Y/G TRANSFL

NHD-0240AZ-FL-YBW

Manufacturer Part Number
NHD-0240AZ-FL-YBW
Description
LCD MOD CHAR 2X40 Y/G TRANSFL
Manufacturer
Newhaven Display
Series
NHD-0240AZ-Fr

Specifications of NHD-0240AZ-FL-YBW

Display Type
STN - Super-Twisted Nematic
Display Mode
Transflective
Number Of Digits/alpha
80
Outline L X W X H
182.00mm x 33.50mm x 13.30mm
Viewing Area
152.50mm L x 16.50mm W
Backlight
LED - Yellow/Green
Display Format
40 x 2
Character Size
5.55mm H x 3.20mm W
Character Format
5 x 8 Dots
Voltage - Supply
5.0V
Dot Size
0.60mm W x 0.65mm H
Operating Temperature
-20°C ~ 70°C
Character Count X Line
40 x 2
Module Size (w X H X T)
182 mm x 33.5 mm x 13.5 mm
Fluid Type
STN
Background Color
Yellow-Green
Voltage Rating
5 V
Operating Temperature Range
- 20 C to + 70 C
Backlight Type
LED Yellow-Green
Interface
Parallel
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
NHD-0240AZ-FL-YBW
Manufacturer:
Newhaven Display
Quantity:
135
NHD-0224AZ-FL-YBW
Soldering Precautions:
Operation Precautions:
Limited Warranty
Newhaven Display LCDs and modules are not consumer products, but may be incorporated by Newhaven
Display’s customers into consumer products or components thereof, Newhaven Display does not warrant that
its LCDs and components are fit for any such particular purpose.
1.
2.
3.
Newhaven Display will not be responsible for any subsequent or consequential events or injury or damage
to any personnel or user including third party personnel and/or user. Unless otherwise agreed in writing
between Newhaven Display and the customer, Newhaven Display will only replace or repair any of its LCD
which is found defective electrically or visually when inspected in accordance with Newhaven Display
general LCD inspection standard . (Copies available on request)
has been disregarded. Broken glass, scratches on polarizer mechanical damages as well as defects that
are caused accelerated environment tests are excluded from warranty.
the failures or defect.
4. The modules should be kept in anti-static bags or other containers resistant to static for storage.
5. Only properly grounded soldering irons should be used.
6. If an electric screwdriver is used, it should be grounded and shielded to prevent sparks.
7. The normal static prevention measures should be observed for work clothes and working
8. Since dry air is inductive to static, a relative humidity of 50-60% is recommended.
The liability of Newhaven Display is limited to repair or replacement on the terms set forth below.
No warranty can be granted if any of the precautions state in handling liquid crystal display above
In returning the LCD/LCM, they must be properly packaged; there should be detailed description of
defective insulation of terminals.
benches.
1. Soldering should be performed only on the I/O terminals.
2. Use soldering irons with proper grounding and no leakage.
3. Soldering temperature: 280°C+10°C
4. Soldering time: 3 to 4 second.
5. Use eutectic solder with resin flux filling.
6. If flux is used, the LCD surface should be protected to avoid spattering flux.
7. Flux residue should be removed.
1. The viewing angle can be adjusted by varying the LCD driving voltage Vo.
2. Since applied DC voltage causes electro-chemical reactions, which deteriorate the
3. Driving voltage should be kept within specified range; excess voltage will shorten display
4. Response time increases with decrease in temperature.
5. Display color may be affected at temperatures above its operational range.
7.
6.
display, the applied pulse waveform should be a symmetric waveform such that no DC
component remains. Be sure to use the specified operating voltage.
life.
and humidity could cause polarization degradation, polarizer peel-off or generate
bubbles.
Keep the temperature within the specified range usage and storage. Excessive temperature
For long-term storage over 40°C is required, the relative humidity should be kept below
60%,and avoid direct sunlight.
21
Newhaven Display

Related parts for NHD-0240AZ-FL-YBW