NHD-240128WG-AFTI-VZ#C5 Newhaven Display, NHD-240128WG-AFTI-VZ#C5 Datasheet - Page 34

• Manufacturer Part Number: NHD-240128WG-AFTI-VZ#C5
• Description: LCD MOD GRAPHIC 240X128 TRANSM
• Manufacturer: Newhaven Display

Specifications of NHD-240128WG-AFTI-VZ#C5

• Display Type: FSTN - Film Super-Twisted Nematic
• Display Mode: Transmissive
• Viewing Area: 129.00mm L x 75.00mm W
• Backlight: CCFL - White
• Dot Size: 0.47mm W x 0.47mm H
• Dot Pitch: 0.50mm x 0.50mm
• Dot Pixels: 240 x 128
• Interface: Parallel
• Pixel Density: 240 x 128
• Fluid Type: FSTN Negative
• Module Size (w X H X T): 170 mm x 103.5 mm x 14 mm
• Backlighting: LED White
• Operating Temperature Range: - 20 C to + 70 C
• Product: Graphic LCD Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

11.Reliability
Content of Reliability Test (wide temperature, -20 ~70 )
Note1: No dew condensation to be observed.
Note2: The function test shall be conducted after 4 hours storage at the normal
Note3: Vibration test will be conducted to the product itself without putting it in a container.
High Temperature
storage
Low Temperature
storage
High Temperature
Operation
Low Temperature
Operation
High Temperature/
Humidity Operation
Thermal shock
resistance
Vibration test
Static electricity test
Test Item
Temperature and humidity after remove from the test chamber.
Endurance test applying the high storage temperature
for a long time.
Endurance test applying the high storage temperature
for a long time.
Endurance test applying the electric stress (Voltage &
Current) and the thermal stress to the element for a
long time.
Endurance test applying the electric stress under low
temperature for a long time.
The module should be allowed to stand at 60
For 96hrs under no-load condition excluding the
polarizer,
Then taking it out and drying it at normal temperature.
The sample should be allowed stand the following 10
cycles of
operation
-20
30min
1 cycle
Endurance test applying the vibration during
transportation and using.
Endurance test applying the electric stress to the
terminal.
,90%RH max
5min
25
Environmental Test
Content of Test
30min
70
80
200hrs
-30
200hrs
70
200hrs
-20
200hrs
60 ,90%RH
96hrs
-20 /70
10 cycles
Total fixed
amplitude : 1.5mm
Vibration
Frequency : 10~55Hz
One cycle 60 seconds
to 3 directions of
X,Y,Z for
Each 15 minutes
VS=800V,RS=1.5k
CS=100pF
1 time
Test Condition
2
1,2
——
1
1,2
——
3
——
Note