NHD-2.4-240320ZF-CTXI#-1 Newhaven Display, NHD-2.4-240320ZF-CTXI#-1 Datasheet - Page 20

• Manufacturer Part Number: NHD-2.4-240320ZF-CTXI#-1
• Description: LCD DISP TFT 2.4" 240X320
• Manufacturer: Newhaven Display

Specifications of NHD-2.4-240320ZF-CTXI#-1

• Display Type: TFT - Color LCD
• Display Mode: Transmissive
• Viewing Area: 36.72mm L x 48.96mm W
• Backlight: LED - White
• Dot Pitch: 0.05mm x 0.15mm
• Dot Pixels: 240 x 320
• Interface: Digital
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Dot Size: -
• Lead Free Status / Rohs Status: Details

18.USING LCD MODULES
STANDARD
(6) Avoid contacting oil and fats.
DOC.
LCD is composed of glass and polarizer. Pay attention to the following items when handling.
(1) Please keep the temperature within specified range for use and storage. Polarization degradation, bubble generation or
(2) Do not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass, tweezers, etc.).
(3) N-hexane is recommended for cleaning the adhesives used to attach front/rear polarizers and reflectors made of organic
(4) If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily
(5) Wipe off saliva or water drops immediately, contact with water over a long period of time may cause deformation or color
(7) Condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizers. After products
(8) Do not put or attach anything on the display area to avoid leaving marks on.
(9) Do not touch the display with bare hands. This will stain the display area and degradate insulation between terminals (some
(10) Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets,
(11) As glass is fragile. It tends to become or chipped during handling especially on the edges. Please avoid dropping or
polarizer peel-off may occur with high temperature and high humidity.
substances which will be damaged by chemicals such as acetone, toluene, ethanol and isopropylalcohol.
contaminated, wipe gently with absorbent cotton or other soft material like chamois soaked in Isopropyl alcohol or Ethyl
alcohol. Do not scrub hard to avoid damaging the display surface.
jarring.
fading.
are tested at low temperature they must be warmed up in a container before coming is contacting with room temperature air.
cosmetics are determinated to the polarizers).
moisture condensation or a current flow in a high-humidity environment.
Since LCM has been assembled and adjusted with a high degree of precision, avoid applying excessive shocks to the
PRODUCT
SPEC.
L: length W: width
MODULE
NO.
Length
L≤2.5
不
L≤3
0.03＜W≤0.05
W≤0.03
W≤0.02
W＞0.05
Width
No check
A/B Area C Area
2
Acceptable QTY
Sa round type
2
No check
PAGE
2.50
19