T-51750GD065J-FW-AA Optrex America Inc, T-51750GD065J-FW-AA Datasheet - Page 12

• Manufacturer Part Number: T-51750GD065J-FW-AA
• Description: LCD 6.5" TFT MOD 640X480 VGA
• Manufacturer: Optrex America Inc

Specifications of T-51750GD065J-FW-AA

• Display Type: TFT- Thin Film Transistor
• Display Mode: Transmissive
• Viewing Area: 132.50mm L x 99.40mm W
• Backlight: CCFL - White
• Dot Pixels: 640 x 480 (VGA)
• Interface: TTL
• Attached Touch Screen: No
• Diagonal: 165.1 mm
• Viewing Area (w X H): 132.5 mm x 99.4 mm
• Pixel Density: 640 x 480
• Module Size (w X H X T): 158 mm x 120.4 mm x 11.6 mm
• Backlighting: CCFL White
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: TK065V01 - TOOLKIT TFT 6.5" VGA
• Dot Size: -
• Dot Pitch: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 73-1243

(Fig.5-1)
◆
◆
T-51750GD065J-FW-AA (AA) No. 2003-0199
（１） Measuring Device
（２） Measuring Point
（３） Method of Measuring
（１） Measuring Device
（２） Measuring Point
（３） Method of Measuring
Method of Brightness Measurement
Method of Contrast Measurement
LCD Module
(cd/m
・ Set LCD module to =0 , =0 .
・ Change signal voltage to measure maximum brightness Y1 and minimum brightness
・ Contrast is derived from CR=Y1/Y2.
Apply signal voltage (displayed in white) to maximize brightness and measure brightness B
The distance between BM-7’s front lens to surface panel is 500mm.
Measured after backlight has been lit for more than 30 minutes.
On condition
TOPCON BM-7,Measuring Field:1
TOPCON BM-7,Measuring Field:1
Center of display: same as Method of Brightness Measurement
Center of Display
Y2.
2
).
: A horizontal angle from measuring direction to perpendicular.
: A vertical angle from measuring direction to perpendicular.
=0 , =0
Distance
:500mm
OPTREX CORPORATION
Center
(X, Y) = (320, 240 ）
TOPCON
(Pixel)
BM-7
Page 12/24