T-55466D084J-LW-A-AAN Optrex America Inc, T-55466D084J-LW-A-AAN Datasheet - Page 23

no-image

T-55466D084J-LW-A-AAN

Manufacturer Part Number
T-55466D084J-LW-A-AAN
Description
LCD 8.4" TFT MOD 800X600 SVGA
Manufacturer
Optrex America Inc
Datasheet

Specifications of T-55466D084J-LW-A-AAN

Display Type
TFT- Thin Film Transistor
Display Mode
Transmissive
Viewing Area
170.40mm L x 127.80mm W
Backlight
LED - White
Dot Pitch
0.21mm x 0.21mm
Dot Pixels
800 x 600 (SVGA)
Interface
LVDS
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Dot Size
-
Lead Free Status / Rohs Status
 Details
Please pay attention to the followings in handling TFT-LCD products;
(1) ASSEMBLY PRECAUTION
b. Please design display housing in accordance with the following guide lines.
c. Please do not push or scratch LCD panel surface with anything hard. And do not soil LCD
d. Please wipe off LCD panel surface wi7.0surface hee
OPTREX
a. Please mount the LCD module by using mounting hole with a screw clamping torque
(a) Housing case must be designed carefully so as not to put stresses on LCD and not to
(b) Under high temperature environment, performance and life time of LED may heavily
(c) Keep sufficient clearance between LCD module back surface and housing when the LCD
(d) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD
(e) Design the LED driver location and connector position carefully so as not to give stress to
(f) Keep sufficient clearance between LCD module and the others parts, such as inverter and
panel surface by touching with bare hands. (Polarizer film, surface of LCD panel is easy to be
flawed.)
(g) To avoid local elevation/decrease of temperature, considering location of heating element,
(recommended value: 0.3 Nm). Please do not bend or wrench the LCD module in assembling.
Please do not drop, bend or twist the LCD module in handling.
heat release, thermal design should be done.
shorten. When you design with our LCD product, please consider radiating heat and
ventilation for good heat management.
module is mounted. Approximately 1.0mm of the clearance in the design is recommended
taking into account the tolerance of LCD module thickness and mounting structure height
on the housing.
module, still sufficient clearance is required, such as 0.5mm. This clearance is, especially, to
be reconsidered when the additional parts are implemented for EMI countermeasure.
LED backlight cable.
speaker so as not to interfere the LCD module. Approximately 1.0 mm of the clearance in
the design is recommended.
wrench module.
Confidential
(23/25)
T-55466D084J-LW-A-AAN

Related parts for T-55466D084J-LW-A-AAN