GLK12232-25-SM-WB-E Matrix Orbital, GLK12232-25-SM-WB-E Datasheet - Page 42

• Manufacturer Part Number: GLK12232-25-SM-WB-E
• Description: LCD GRAPHIC DISPL 122X32 BLU WHT
• Manufacturer: Matrix Orbital

Specifications of GLK12232-25-SM-WB-E

• Display Type: LCD - Color
• Display Mode: Transmissive
• Viewing Area: 60.20mm L x 18.00mm W
• Backlight: LED - Blue
• Dot Size: 0.40mm W x 0.40mm H
• Dot Pitch: 0.44mm x 0.44mm
• Dot Pixels: 122 x 32
• Interface: I²C, RS232, TTL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.4 Poll Key Press
10.5 Clear Key Buffer
10.6 Set Debounce Time
Matrix Orbital
Syntax
Description
Remembered
Syntax
Description
Remembered
Syntax
This command returns any buffered key presses via the serial interface.
The host system must be set up to receive key codes. When the display
receives this command, it will immediately return any buffered key
presses which may have not been read already. If there is more than one
key press buffered, then the high order bit (MSB) of the returned key
code will be set (1). If this is the only buffered key press, then the MSB
will be cleared (0). If there are no buffered key presses, then the
returned code will be 0x00. Please note that to make use of this
command, the “Auto Transmit Key Presses” mode should be off.
NOTE This command is not available in I
to address the module and read a byte. No preceding commands are necessary. If there are
no keys pressed the read will result in a 0x00.
No
This command clears any unread key presses. In a menu application, if
the user presses a key which changes the menu context, any following
key presses may be inaccurate and can be cleared out of the buffer
between menu changes to prevent jumping around the menu tree. It may
also be used, in effect, to reset the keypad in case the host application
resets for whatever reason.
No
Hexadecimal
Decimal
ASCII
Hexadecimal
Decimal
ASCII
Hexadecimal
Decimal
ASCII
GLK12232-25-SM
0xFE 0x26
254 38
254 “&”
0xFE 0x45
254 69
254 “E”
0xFE 0x55 [time]
254 85 [time]
254 “U” [time]
2
C. To read keys in I
2
C mode, one just needs
37