T-51381L064J-FW-P-AA Optrex America Inc, T-51381L064J-FW-P-AA Datasheet - Page 5

• Manufacturer Part Number: T-51381L064J-FW-P-AA
• Description: LCD 6.4" TFT MOD NTSC/PAL
• Manufacturer: Optrex America Inc

Specifications of T-51381L064J-FW-P-AA

• Display Type: TFT- Thin Film Transistor
• Display Mode: *
• Viewing Area: 130.10mm L x 97.30mm W
• Dot Pitch: 0.42mm x 0.14mm
• Dot Pixels: 960 x 234
• Interface: -
• Backlight: -
• Dot Size: -
• Other names: 73-1201

15.75KH z
Note 5-1-3: The timing chart of HSY and external Horizontal input:
Note 5-1-4: If there is any question about CKC=0, please contact PVI.
Note 5-2: If CKC=1, the phase lock loop (PLL) is adopted in the LCD module.
Note 5-3: V
Note 5-4: V
Note 5-5: V
Note 5-6: V
Note 5-7: The frequency of PSI is 15.75KHz.
Note 5-1-2: CKC= Low
C SY
a. If CKC=0, the phase lock loop (PLL) is not adopted in the LCD module.
b. If CKC=0, the external clock input frequency of Pin 3 is 18.9 MHz.
c. Input external Vertical Sync (VIY, Pin 17) and Horizontal Sync (Pin 1) to synchronize
d. The pulse width of external Horizontal Sync input is 4.7 s±2 s. The pulse width of
e. The pulse length of external input Vertical Sync of NTSC system is 262H±4H and
T-51381L064J-FW-P-AA
the LCD module. External Horizontal Sync and External Vertical Sync input pulse can
be high going or low going.
external Vertical Sync input is 2H~4H.
PAL system is 312H±4H.
If CKC=0, the phase lock loop (PLL) is not adopted in the LCD module.
If CKC=0, the external clock input frequency of Pin 3 is 18.9 MHz.
GH
GL
DD
SH
TYP.｡=+20V
TYP.｡=-5V
TYP.｡=+5V
TYP.｡=+14V
CKC=1
CKC=0
4.7 s
10 s
63.5 s
HSY
(Output)
External
H-Sync
(Input)
OPTREX CORPORATION
Page 5/22
5V
0V