T-51380L050J-FW-P-AA Optrex America Inc, T-51380L050J-FW-P-AA Datasheet - Page 5

• Manufacturer Part Number: T-51380L050J-FW-P-AA
• Description: LCD 5" TFT MODULE NTSC/PAL
• Manufacturer: Optrex America Inc

Specifications of T-51380L050J-FW-P-AA

• Display Type: TFT- Thin Film Transistor
• Display Mode: *
• Viewing Area: 102.70mm L x 74.50mm W
• Dot Pitch: 0.32mm x 0.11mm
• Dot Pixels: 960 x 234
• Interface: -
• Backlight: -
• Dot Size: -
• Other names: 73-1204

5-3) Input / Output Connector
Note 5-1-2: CKC= Low <VGA mode>
Note 5-1-3: If there is any question about CKC=0, please contact PVI.
Note 5-2 ： V
Note 5-3 ： V
Note 5-4 : V
Note 5-5 ： V
Note 5-6 : Hi (+5V) for shift Right; Input Low (0V) for inverse (shift Left).
Note 5-7 : Hi (+5V) for DOWN; Low (0V) for UP.
Note 5-8 : NTSC= Hi(+5V),PAL=Low(0V)
5-2) Backlight driving
Note 5-9 ： Low voltage side of backlight inverter connects with Ground of inverter circuits.
B) Backlight Connector
( ELCO,00-6200-207-032-800 )
A) LCD Module Connector
Pin No
FFC Down Connector
20 Pins
Pitch ： 1.0 mm
JST BHR-03VS-1
Pin No. ： 3
Pitch ： 4 mm
White : Low Voltage
Pink : High Voltage
1
3
a. If CKC=0, the phase lock loop (PLL) is not adopted in the LCD module.
b. If CKC=0, the external clock input frequency of Pin 3 is 25.17 MHz.
c. Input external Vertical Sync (VSY, Pin 14) and Horizontal Sync (Pin 1) to synchronize
d. The pulse width of external Horizontal Sync input is 4.7 s ± 2 s. The pulse width of
T-51380L050J-FW-P-AA
the LCD module. External Horizontal Sync and External Vertical Sync input pulse can
be high going or low going.
external Vertical Sync input is 2H~4H.
DD
GH
GL
CC
:+5V
TYP. ＝ +17V
TYP. ＝ -15V
TYP. ＝ +5V
Symbol
VL1
VL2
Input terminal (Low voltage side)
Input terminal (Hi voltage side)
Description
OPTREX CORPORATION
Wire color : white
Wire color : pink
Note 5-9
Remark
Page-5/20