NHD-24064WG-ATFH-VZ#000CB Newhaven Display, NHD-24064WG-ATFH-VZ#000CB Datasheet - Page 23

• Manufacturer Part Number: NHD-24064WG-ATFH-VZ#000CB
• Description: LCD MOD GRAPH 240X64 WH TRANSFL
• Manufacturer: Newhaven Display
• Series: NHD-24064WG-Ar

Specifications of NHD-24064WG-ATFH-VZ#000CB

• Display Type: LCD - Monochrome
• Display Mode: Transflective
• Viewing Area: 133.00mm L x 39.00mm W
• Backlight: LED - White
• Dot Size: 0.49mm W x 0.49mm H
• Dot Pitch: 0.53mm x 0.53mm
• Dot Pixels: 240 x 64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -

.Data Auto Read/Write
Newhaven Display International, LLC
The command is convenient for sending a full screen of data from the external display RAM.
After setting Auto mode, a Data Write (or Read) command is need not be sent between each
datum. A Data Auto Write (or Read) command must be sent after a Set Address Pointer command.
After this command, the address pointer is automatically incremented by 1 after each datum. In
Auto mode, the T6963C cannot accept any other commands.
The Auto Reset command must be sent to the T69963C after all data has been sent, to clear Auto
mode.
(Note) A Status check for Auto mode
10110000
10110001
10110010
a) Auto Read mode
CODE
(STA2, STA3 should be checked between sending of each datum. Auto Reset should be
performed after checking STA3=1 (STA2=1.) Refer to the following flowchart.
HEX.
B0H
B1H
B2H
Set Data Auto Write
Set Data Auto Read
Auto Reset
FUNCTION
b) Auto Write mode
NHD-24064WG-ATFH-VZ#000-CB
OPERAND
23