HDSP-A157 Avago Technologies US Inc., HDSP-A157 Datasheet - Page 10

• Manufacturer Part Number: HDSP-A157
• Description: DISPLAY 7SEGMENT ALGAAS CA 0.3"
• Manufacturer: Avago Technologies US Inc.

Specifications of HDSP-A157

• Display Type: 7-Segment
• Common Pin: Common Anode
• Number Of Digits/alpha: +/-1 (overflow)
• Size / Dimension: 0.50" L x 0.30" W x 0.24" H (12.70mm x 7.62mm x 6.09mm)
• Digit/alpha Size: 0.30" (7.62mm)
• Color: Red
• Voltage - Forward (vf) Typ: 1.8V
• Current - Test: 20mA
• Millicandela Rating: 14mcd
• Wavelength - Peak: 645nm
• Power Dissipation (max): 96mW
• Package / Case: 10-DIP (0.200", 5.08mm), 7 Leads
• Number Of Digits: 1
• Character Size: 7.6 mm
• Illumination Color: Red
• Wavelength: 645 nm
• Operating Voltage: 1.8 V
• Operating Current: 20 mA
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 20 C
• Luminous Intensity: 14 mcd
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Color Categories
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago
representatives for further clarification/information.
For product information and a complete list of distributors, please go to our web site:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5988-4434EN
AV02-2553EN - August 30, 2010
Color
Yellow
Green
Bin
1
3
2
4
2
3
4
5
Dominant Wavelength (nm)
Min.
581.50
584.00
586.50
589.00
573.00
570.00
567.00
564.00
Max.
585.00
587.50
590.00
592.50
577.00
574.00
571.00
568.00
www.avagotech.com
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloroethylene, carbon tet-
rachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
For information on soldering LEDs, please refer to Appli-
cation Note 1027.