TRX10GDL0610 FCI, TRX10GDL0610 Datasheet - Page 3

• Manufacturer Part Number: TRX10GDL0610
• Description: TXRX OPT SFP+ LRM 10GB/S 1310NM
• Manufacturer: FCI

Specifications of TRX10GDL0610

• Data Rate: 10Gbps
• Wavelength: 1310nm
• Applications: Ethernet
• Voltage - Supply: 3.1 V ~ 3.5 V
• Connector Type: LC
• Mounting Type: SFP+
• Maximum Forward Current: 150 mA
• Operating Voltage: - 0.5 C to + 3.6 V
• Transmission Distance: 220 m
• Product: Transceiver
• Operating Supply Voltage: - 0.5 C to + 3.6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 827-1002

Product Specification
10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100
The Transceiver convert information from electrical to optical format, and back again, at different data rates
depending upon the chosen standard.
The transmit path consists of an AC coupled 100 ohm differentially terminated driver coupled to a highly
reliable 1310nm DFB. The laser output may be disabled by pulling the TX_DISABLE line high. The laser is
also disabled if this line is left floating, as it is pulled high inside the transceiver. A fault condition is raised
upon detection of an abnormal laser state. The RATE-SELECT is not implemented in the LRM module.
The receiver path consists of a ROSA (receiver optical sub-assembly) for optical electrical conversion, fol-
lowed by a linear amplifier to boost the electrical signal. A LOSS_OF_SIGNAL (LOS) status line is provided
to facilitate easy link detection. The receiver RATE_SELECT pin is not used by the transceiver.
Complete digital optical monitoring is implemented in compliance to SFF-8472 and made accessible via
the 2-wire interface providing real time information about all important module parameters and status in-
formation.
FUNCTIONAL DESCRIPTION
www.fciconnect.com
TRX10GDL0610 Datasheet, Rev C1-01, July 2010
3