CXA-0549 TDK Corporation, CXA-0549 Datasheet - Page 2
![INVERTER 12V-INPUT 1500V-OUTPUT](/photos/28/27/282777/cxa-0549_sml.jpg)
CXA-0549
Manufacturer Part Number
CXA-0549
Description
INVERTER 12V-INPUT 1500V-OUTPUT
Manufacturer
TDK Corporation
Type
Inverters for CCFL and UV Lampsr
Datasheet
1.CXA-0549.pdf
(9 pages)
Specifications of CXA-0549
Voltage - Input
10.8 ~ 13.2V
Output
1500V
Size / Dimension
5.51" L x 1.18" W x 0.31" H (140mm x 30mm x 8mm)
Mounting Type
Chassis Mount
Function
Dimming Inverter
Input Voltage
10.8 V to 13.2 V
Number Of Outputs
2
Output Voltage
1250 V
Input Current
6 A
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
445-5393
appropriate measures to prevent the entry of foreign substances into the inverter after it i s installed.
inverter.
damaged.
This product is designed for lighting Cold Cathode Fluorescent Lamps.
Do not use it with any other load.
Store this product under the conditions defined in the specification document.
Do not store this product in an environment where dust, dirt or corrosive gas(salt,acid,base, etc.) is prese nt.
This product is subject to high voltage. If there is a possibility that the user may to uch the product,
provide a proper warning indication in order to draw the user's attention.
This product is designed for use with general electronic equipment.
If it is to be used with medical equipment that directly affects human life or for the control of
transportation equipment to which passengers entrust their lives, provide thorough fail-safe measures.
Consult us before using if this product is to be installed in a habitual vibration environment (vehicl e , etc.).
Avoid using this product under high temperatures or high humidity or in an envir o nment in which
dust, dirt or any corrosive gas (salt,acid,base, et c .) is present.
Also,be careful not to allow the formation of dew condensation. It may result in damage or elec tric shock.
If the product does not have a built-in protective circuit (circuit breaker, fuse, et c .),
it is recommended that a fuse be used at the input stage to prevent the generation of
smoke or fire in the event of a malfunction.
Even when the product has a built-in protective circuit (circuit breaker, fuse, etc. ) ,
the circuit may not function properly due to inappropriate operating conditions or power-supply capacity.
It is recommended that an appropriate protective circuit (circuit breaker, fuse, etc.)
be provided separately from the built-in circuit.
Use the product only within the specified input voltage, output power, output voltage
and operating temperature ranges. Exceeding these values may result in damage, etc.
Provide a measure for the prevention of surge voltage due to lightning, etc.
Abnormal voltage may result in damage, etc.
To prevent problems from occurring as a result of a short circuit in the high voltage section, be sure to take
This product is not designed to provide resistance to radiatio n.
In order to protect the inverter from vibration and shock, be sure to use all the mounting holes when installing the
Ripples could be superimposed on the voltage and the current in the input source connected to the inverter ,
depending on the impedance in the input source, wiring, etc.
When you select an input source, please check waveforms, etc on the final set.
Please use all the mounting holes, because to defend the converter from vibration and impact.
This product is subject to high voltage. Do not touch it while the power is on.
Failing to do so may result in electric shock.
This product uses thin wires. Observe the following precautions and handle it wit h care so
as not to cause wire breakage. Broken wire may result in damage, etc.
Do not apply excessive stress during ins tallation.
It may cause chipping and cracking,resulting in damage, etc.
Provide clearance between the high-voltage section of this product and the frame body on which the product
is installed and also the conductor section as on page 2 , [1] ”Outline” .
Do not use the product after it has been dropped because there is the possibility that components have been
When using this product, give due consideration to the precautionary notes described below
TDK-Lambda
Do not stack multiple products on top of one another.
Do not allow the product to come in contact with tools, etc.
and ensure a safe design. Inappropriate use may result in electric shock, injury or fire.
Precautionary Notes Regarding the Use of This Inverter
<The specifications may be changed without any notice.>
No.
Handling Precautions
NAME OF DRAWING
MATERIALS NAME
Product Drawing
Warning
Caution
PRODUCT NAME or MODEL,TITLE
DC-AC INVERTER UNIT CXA-0549
QU
MATERIAL
DRAWING No.
CTR-3835-A
TSB-08-01-05(00) form-6(A4)
REMARK
PAGE
1