HLMA-QH00 Avago Technologies US Inc., HLMA-QH00 Datasheet - Page 5

• Manufacturer Part Number: HLMA-QH00
• Description: LED DOME ALINGAP RED/ORANGE
• Manufacturer: Avago Technologies US Inc.

Specifications of HLMA-QH00

• Viewing Angle: 15°
• Color: Orange, Red
• Luminous Flux @ Current - Test: 250 mlm
• Millicandela Rating: 500mcd
• Current - Test: 20mA
• Wavelength - Dominant: 615nm
• Wavelength - Peak: 621nm
• Voltage - Forward (vf) Typ: 1.9V
• Lens Type: Clear
• Lens Style/size: Round, 1.78mm
• Package / Case: Axial, Flat Leads
• Size / Dimension: 1.99mm L x 2.21mm W
• Height: 2.92mm
• Mounting Type: Through Hole
• Resistance Tolerance: 615nm
• Led Size: 2.1 mm x 2.2 mm
• Illumination Color: Red-Orange
• Operating Voltage: 1.9 V
• Wavelength: 615 nm
• Luminous Intensity: 500 mcd
• Mounting Style: SMD/SMT
• Operating Current: 20 mA
• Lens Dimensions: 1.9 mm
• Lens Shape: Dome
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 40 C
• Peak Wavelength: 621 nm
• Bulb Size: 1.9mm
• Led Color: Red Orange
• Forward Current If: 20mA
• Forward Voltage: 1.9V
• Led Mounting: Through Hole
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Absolute Maximum Ratings at T
Parameter
Peak Forward Current
Average Forward Current (I
DC Forward Current
Power Dissipation
Reverse Voltage (I
Transient Forward Current (10 μs Pulse)
Operating Temperature Range
Storage Temperature Range
LED Junction Temperature
Lead Soldering Temperature [1.6 mm (0.063 in.) from body]
SMT Reflow Soldering Temperature
Notes:
1. Maximum I
2. Refer to Figure 5 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 4.
4. The transient peak current is the maximum non-recurring peak current these devices can withstand without damaging the LED die and wire
5. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
6. Operation at currents below 5 mA is not recommended, please contact your Avago sales representative.
Proper right angle mounting to a PC board to prevent protruding cathode tab from shorting to anode connection.
5
bonds. Operation at currents above Absolute Maximum Peak Forward Current is not recommended.
NO. ANODE DOWN.
AVG
at f = 1 kHz.
R
= 100 μA)
[3,5,6]
[2]
PEAK
= 100 mA)
A
= 25°C
[5]
[1,2]
CATHODE
TAB
YES. CATHODE DOWN.
HLMA-xxxx
100
30
50
105
260°C for 20 seconds
260°C for 5 seconds
–40 to +100
–55 to +100
500
110
5
HLMT-xxxx
100
37
50
120
Unit
mA
mA
mA
mW
V
mA
°C
°C
°C