B32023A3683M EPCOS Inc, B32023A3683M Datasheet - Page 5

• Manufacturer Part Number: B32023A3683M
• Description: CAP 68000PF 300VAC EMI SUPPRESN
• Manufacturer: EPCOS Inc
• Series: MKP B32023r

Specifications of B32023A3683M

• Capacitance: 0.068µF
• Voltage - Ac: 300V
• Voltage - Dc: 1500V (1.5kV)
• Dielectric Material: Polypropylene, Metallized
• Tolerance: ±20%
• Operating Temperature: -40°C ~ 110°C
• Mounting Type: Through Hole
• Package / Case: Radial
• Size / Dimension: 1.043" L x 0.276" W (26.50mm x 7.00mm)
• Height: 0.630" (16.00mm)
• Termination: PC Pins
• Lead Spacing: 0.886" (22.50mm)
• Features: EMI Suppression
• Capacitor Application: Suppression
• Capacitor Dielectric Type: Polypropylene
• Capacitance Tolerance: ± 20%
• Voltage Rating: 300V
• Capacitor Case Style: Radial
• No. Of Pins: 2
• Capacitor: RoHS Compliant
• Material, Element: Polypropylene Film
• Voltage, Rating: 300 VAC
• Max. Operating Temperature: 100°C
• Dielectric: Polypropylene (MKP)Plastic Case (UL 94 V-0)
• Standard Lead Lengths: 6 —1 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Esr (equivalent Series Resistance): -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 495-3800; B32023A3683M

The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for certain areas
2. We also point out that in individual cases, a malfunction of passive electronic components or failure
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this publication may
5. We constantly strive to improve our products. Consequently, the products described in this publication
6.
7. The trade names EPCOS, EPCOS-JONES, Alu-X, BAOKE, CeraDiode, CSSP, MLSC, MotorCap, PhaseCap,
FK DC PM
Important notes
of application. These statements are based on our knowledge of typical requirements that are often placed
on our products in the areas of application concerned. We nevertheless expressly point out that such
statements cannot be regarded as binding statements about the suitability of our products for a
particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications
or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent
on the customer to check and decide whether an EPCOS product with the properties described in the product
specification is suitable for use in a particular customer application.
before the end of their usual service life cannot be completely ruled out in the current state of the art,
even if they are operated as specified. In customer applications requiring a very high level of operational
safety and especially in customer applications in which the malfunction or failure of a passive electronic
component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must
therefore be ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of malfunction or failure of a passive electronic component.
contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as
“hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet
(www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
may change from time to time. The same is true of the corresponding product specifications. Please check
therefore to what extent product descriptions and specifications contained in this publication are still
applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot
guarantee that all products named in this publication will always be available.
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the
“General Terms of Delivery for Products and Services in the Electrical Industry” published by the
German Electrical and Electronics Industry Association (ZVEI).
PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 5 of 5
March 2007