AA3529QB24ZS Kingbright Corp, AA3529QB24ZS Datasheet - Page 2

• Manufacturer Part Number: AA3529QB24ZS
• Description: LED 3.5X2.8MM BLUE CLR 0.5W SMD
• Manufacturer: Kingbright Corp

Specifications of AA3529QB24ZS

• Viewing Angle: 120°
• Color: Blue
• Current - Test: 150mA
• Luminous Flux @ Current - Test: 6lm
• Current - Max: 150mA
• Lumens @ Current - Max: 6lm
• Lumens/watt @ Current - Test: 11lm/W
• Voltage - Forward (vf) Typ: 3.5V
• Wavelength: 457nm
• Lens Style/size: Round, 2.4mm
• Mounting Type: Surface Mount
• Package / Case: PLCC-2
• Illumination Color: Blue
• Wavelength/color Temperature: 457 nm
• Luminous Flux: 6 lm
• Luminous Intensity: 1000 mcd
• Power Rating: 0.5 W
• Operating Voltage: 3.5 V
• Operating Current: 150 mA
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 754-1323-2

SPEC NO: DSAH9589
APPROVED: WYNEC
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
damage the internal circuitry.
of the nozzle should be as large as possible.
and avoid damage during production.
REV NO: V.3
CHECKED: Allen Liu
DATE: JUL/10/2008
DRAWN: R.CHEN
PAGE: 2 OF 6
ERP: 1201003134