AAAF5051-03 Kingbright Corp, AAAF5051-03 Datasheet - Page 2

• Manufacturer Part Number: AAAF5051-03
• Description: LED RED-ORANGE/BLUE/GREEN SMD
• Manufacturer: Kingbright Corp

Specifications of AAAF5051-03

• Wavelength: 624nm, 525nm, 450nm
• Viewing Angle: 120°
• Color: Orange-Red, Green, Blue (RGB)
• Current - Test: 120mA Orange-Red, 150mA Green, 150mA Blue
• Luminous Flux @ Current - Test: 9lm Orange-Red, 20lm Green, 4.5lm Blue
• Current - Max: 120mA Orange-Red, 150mA Green, 150mA Blue
• Lumens @ Current - Max: 9lm Orange-Red, 20lm Green, 5lm Blue
• Lumens/watt @ Current - Test: 33lm/W Orange-Red, 38lm/W Green, 9lm/W Blue
• Voltage - Forward (vf) Typ: 2.3V Orange-Red, 3.5V Green, 3.5V Blue
• Lens Style/size: Square, 4.25mm
• Mounting Type: Surface Mount
• Package / Case: 5.00mm L x 5.00mm W x 1.30mm H
• Led Size: 5 mm x 5 mm
• Illumination Color: Orange-Red, Green, Blue
• Lens Color/style: Water Clear
• Operating Voltage: 3.5 V, 2.3 V, 3.5 V
• Mounting Style: SMD/SMT
• Operating Current: 120 mA, 150 mA, 150 mA
• Lens Dimensions: 4.25 mm
• Lens Shape: Square
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 754-1486-2

SPEC NO: DSAK2496
APPROVED: WYNEC
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
damage the internal circuitry.
of the nozzle should be as large as possible.
and avoid damage during production.
REV NO: V.4
CHECKED: Allen Liu
DATE: JUN/05/2010
DRAWN: F.F.ZHou
PAGE: 2 OF 9
ERP: 1201005942