LD G5AP-2M2N-35-1-Z OSRAM Opto Semiconductors Inc, LD G5AP-2M2N-35-1-Z Datasheet - Page 4

• Manufacturer Part Number: LD G5AP-2M2N-35-1-Z
• Description: LED TOPLED ADV DEEP BLUE 4PLCC
• Manufacturer: OSRAM Opto Semiconductors Inc
• Series: TOPLEDr

Specifications of LD G5AP-2M2N-35-1-Z

• Color: Blue
• Current - Test: 100mA
• Current - Max: 200mA
• Voltage - Forward (vf) Typ: 3.3V
• Wavelength: 457nm
• Lens Style/size: Round, 2.6mm
• Viewing Angle: 145°
• Mounting Type: Surface Mount
• Package / Case: PLCC-4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Luminous Flux @ Current - Test: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 475-2851-2; LD G5AP-2M2N-35-1-Z; Q65110A8037

Figure 5: Recommended design of the Pick & Place Tool for the APT Plus
By releasing the pressure on the button, the
vacuum is removed and the component can
be placed at the desired position.
When processing by means of automated
placement machines, care should be taken
that an appropriate pick and place tool is
used and that the process parameters
conform to the package characteristics.
Figure 5 shows the recommended design for
the pick and place tool for damage-free
processing of the Advanced Power TOPLED
Plus.
Cleaning of the APT Plus should only be
performed with isopropyl alcohol (see also
application note "Cleaning of LEDs"). Other
cleansers or ultrasonic cleaning can lead to
failure of the LED.
Processing
The Advanced Power TOPLED Plus is
generally supplied in tape and reel format.
Each reel only contains a single brightness
group and a single wavelength or color
group. That is, from the brightness groups
within the family, one tape contains only one
of the groups.
September, 2009
Page 4 of 7
The APT Plus is generally compatible with
existing industrial SMT processing methods,
so that all customary populating techniques
can be used for assembly.
For mounting the component, a standard
reflow soldering process is recommended, in
which a typical lead-free SnAgCu metal alloy
solder is used.
Figure 6 shows the solder requirements and
temperature curve for lead-free soldering of
the APT Plus.
Figure 6: IR reflow soldering profile for
lead-free soldering of the APT Plus
The LED should be prepared according to
JEDEC Level 4.