LOPL-E001M Lite-On Electronics, LOPL-E001M Datasheet - Page 11

• Manufacturer Part Number: LOPL-E001M
• Description: LED 1W WARM WHT 3800K SMD
• Manufacturer: Lite-On Electronics

Specifications of LOPL-E001M

• Viewing Angle: 110°
• Color: White, Neutral
• Current - Test: 350mA
• Luminous Flux @ Current - Test: 28lm
• Current - Max: 350mA
• Lumens @ Current - Max: 28lm
• Lumens/watt @ Current - Test: 21lm/W
• Voltage - Forward (vf) Typ: 3.8V
• Wavelength: 3800K
• Lens Style/size: Round with Flat Top
• Mounting Type: Surface Mount
• Package / Case: 8mm Round
• Illumination Color: Warm White
• Wavelength/color Temperature: 3800 K
• Luminous Flux: 28 lm
• Power Rating: 1 W
• Operating Voltage: 3.8 V
• Operating Current: 350 mA
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 80 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 160-1779-2

Part No.: LOPL-E001M DATA SHEET
BNC-OD-C131/A4
8.4 ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:
l
l
l
l
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low
forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and V
of the suspect LEDs at low currents. The V
product.
8.5 Suggested Checking List
Training and Certification
Static-Safe Workstation & Work Areas
Personnel Grounding
1.
2.
1.
2.
3.
4.
1.
2.
3.
4.
5.
Use a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling.
Everyone working in a static-safe area is ESD-certified?
Training records kept and re-certification dates monitored?
Static-safe workstation or work-areas have ESD signs?
All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V?
All ionizer activated, positioned towards the units?
Each work surface mats grounding is good?
Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel
strap or conductive shoes with conductive flooring?
If conductive footwear used, conductive flooring also present where operator stand or walk?
Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V?
Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all
DLs?
All wrist strap or heel strap checkers calibration up to date?
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
F
of “good” LEDs should be >2.0V@0.1mA for InGaN
Page:
11
of
12
F