GW5BNC15L02 Sharp Microelectronics, GW5BNC15L02 Datasheet - Page 8

• Manufacturer Part Number: GW5BNC15L02
• Description: LED MOD 3.5WATT ZENIGATA 5000K
• Manufacturer: Sharp Microelectronics
• Type: Without Connectorr

Specifications of GW5BNC15L02

• Color: White
• Luminous Flux @ Current - Test: 190 lm
• Current - Test: 360mA
• Current - Max: 360mA
• Driver Circuitry: No
• Voltage: 10.2V
• Wavelength: 5000K
• Configuration: Single
• With Connector: No
• Voltage - Input: 10.2V
• Power - Input: 3.5W
• Illumination Color: White
• Wavelength/color Temperature: 5000 K
• Luminous Flux: 190 lm
• Power Rating: 4.4 W
• Operating Voltage: 10.2 V
• Operating Current: 400 mA
• Minimum Operating Temperature: - 30 C
• Maximum Operating Temperature: + 90 C
• Lens Shape: Rectangular
• Number Of Leds: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 425-2733; GW5BNC15L00

Fig. 11 Screw-mounting Dimensions
1. Store these parts between 5° and 30°C, at a relative humidity of less than 60%.
2. After breaking the package seal, maintain the environment within 5° to 30°C, at a relative humidity of less than
3. This part is not designed to directly resist excessive moisture, such as dew or condensation; or corrosive (salt)
4. This part can be easily damaged by external stress. Make sure it is not mechanically stressed during or after
5. This part has a very high light output. Looking directly at it during full power output can cause injury.
6. Sharp recommends taking proper personal and environmental static control precautions when handling this
7. Sharp recommends handling these parts in a clean, non-dusty environment since surface dust may be difficult
8. Sharp recommends confirming the part’s performance, reliability, and resistance to any of these conditions, if it
■ Packing Specifications
1. Tray shape and dimensions conforms to those shown in Fig. 12.
2. Number of parts per box: 500
3. Number of parts per tray: 35, packed as:
1. Trays are packed in moisture-proof bags in groups of 15 then sealed.
2. This set is placed in an outer shipping box.
3. Shipping box dimensions: 235 × 220 × 90 mm.
Storage and Handling
Packaging Method
60%, and mount the parts within one week.
air or corrosive gases, such as Cl, H
assembly.
part.
to remove and can affect the optical performance of the part.
is to be used in any of these environments:
• Direct sunlight, outdoor exposure, dusty conditions
• In water, oil, medical fluids, and organic solvents
• Excessive moisture, such as dew or condensation
• Corrosive (salt) air or corrosive gases, such as Cl, H
• 14 trays or 10, when shipping just one tray.
16.26
±0.05
2-M2.6
2
S, NH
3
, SO
2
, NO
8
2
X
S, NH
.
3
, SO
2
, NO
X
GW5xxC15Lx2
Sheet No.: DG-xxxxx