STN0201N Stanley Electric Co, STN0201N Datasheet - Page 6

• Manufacturer Part Number: STN0201N
• Description: LED SLIM STICK 15LEDS COOL WHITE
• Manufacturer: Stanley Electric Co
• Series: S-Typer
• Type: Plug and Playr

Specifications of STN0201N

• Color: White
• Luminous Flux @ Current - Test: 29 lm
• Current - Test: 100mA
• Current - Max: 100mA
• Driver Circuitry: No
• Voltage: 12V
• Wavelength: 5000K
• Configuration: Linear
• With Connector: No
• Voltage - Input: 12V
• Power - Input: 1.2W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Other names: 404-1184

4. INSTALLATION, CONNECTION
Use a DC12V constant voltage power supply. Stanley recommends the following power supply.
The number of LED modules connected is limited by power supply capacity and LED module contact
capacity.
＊The aforementioned recommended power supplies have sufficient safe performance. However they are
＊The number of connectable LED modules can be limited by distance between power supply and LED
5. CAUTIONS
(1) Please do not bend when using and storing this unit, anytime. Should this product be
(2) In order to prevent electrostatic breakdown at the time of a mounting, please be sure to
(3) Please advise especially the parts (light emitting diode, resistor, etc.) that are mounted in
(4) Please be sure to turn OFF the power source when a mounting and removal of this unit.
(5) When connecting to another unit or power source, do not reverse connect.
(6) In real usage, take care not to allow any conductive touch parts to touch the solder
(7) Please take measures to dustproof the unit, as any dust etc. will effects the quality of
(8) In this unit, please do not submit to strong impulse or vibration or do not scratch with
(9) Please keep the temperature and Moisture during storage + usage within the limits
(10) When cleaning the LED module post installation, use air pressure to blow off dust or
(11) During real usage, constraints, such as an input voltage, an operating environment, etc.
(12) The characteristics described in this specifications may be altered without previous
not PSE certified.
module or cable resistance.
bent, it may crack in the soldering area, causing malfunction. Please check carefully that
there will be no excessive stress on module in usage.
protect from any electrostatic charge within the reassembling production process.
the switching, the maintenance, etc. that it does not add too much load.
pattern and component part lead on the surface of Slim Stick S-Type.
output.
sharp things, such as an edged tool.
defined by the specification. Moreover, please avoid usage or storage in any environment
exposed to the organic solvent, etching gas (gaseous chlorine and sulfuration gas), etc.,
or fire.
softly wipe with dry cloth to remove dust. Non observance of this caution (such as wiping
with moistened cloth, cleaning with detergent, solvent or alcohol, etc.) will result in LED
lighting failure and/or shorter life.
If the LED modules are installed in an area needing frequent cleaning, cover the LED
modules with a transparent acrylic cover or equivalent.
(temperature and Moisture) defined by the specification, should be observed. If used
outside of specification, the unit may not be able to satisfy optical and the electric
characteristics defined by the specification.
notice in order to improve the performance.
CAUTIONS
STW0201N, STN0201N
STW0101N, STN0101N
(15 LEDs type)
(30 LEDs type)
Model
Recommended Power Supply
COSEL PBA15F-12
COSEL PBA15F-12
COSEL PBA30F-12
5
Number of LED modules
connected
8
5
8