MPLEZW-A1-0000-0000B030H Cree Inc, MPLEZW-A1-0000-0000B030H Datasheet - Page 11

• Manufacturer Part Number: MPLEZW-A1-0000-0000B030H
• Description: LED
• Manufacturer: Cree Inc
• Series: EasyWhite™, Xlamp® MPL-EZWr

Specifications of MPLEZW-A1-0000-0000B030H

• Color: White, Warm
• Current - Test: 3 x 150mA
• Luminous Flux @ Current - Test: 700lm
• Current - Max: 3 x 250mA
• Lumens @ Current - Max: 910lm
• Lumens/watt @ Current - Test: 62lm/W
• Voltage - Forward (vf) Typ: 25V
• Wavelength: 3000K
• Lens Style/size: Round, 11mm
• Viewing Angle: 125°
• Mounting Type: Surface Mount
• Package / Case: 6-SMD
• Led Color: White
• Luminous Flux @ Test: 800lm
• Cct: 3000K
• Forward Current @ Test: 150mA
• Forward Current If Max: 250mA
• Forward Voltage @ Test: 25V
• Power Dissipation Pd: 11.3W
• Rohs Compliant: Yes

Storage Conditions
XLamp MP-L EasyWhite LEDs that have been removed from the original MBB packaging but not soldered should be
stored in one of the following ways:
•
•
•
If an environment of <60% RH is not available for storage, XLamp MP-L EasyWhite LEDs should be baked (described
above) before reflow soldering.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
WARNING. Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye
safety, please refer to the Cree LED Eye Safety application note.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30°C, and
place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%.
Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30° and
the RH at no greater than 60%.
For short-term store only: LEDs can be resealed in the original MBB bag soon after opening. Fresh desiccant may be
needed. Use the included humidity indicator card to verify <60% RH.
XLAMP MP-L EASYWHITE LEDS
11
11