LML6-LV-NW-SP Dialight, LML6-LV-NW-SP Datasheet - Page 2

• Manufacturer Part Number: LML6-LV-NW-SP
• Description: ENG POWERWHITE NEUTRL WHITE SPOT
• Manufacturer: Dialight
• Series: POWERWHITE LVr
• Type: Plug and Playr

Specifications of LML6-LV-NW-SP

• Color: White
• Luminous Flux @ Current - Test: 70 lm
• Current - Test: 350mA
• Current - Max: 350mA
• Driver Circuitry: Yes
• Voltage: 12 V ~ 24 V
• Wavelength: 3950K
• Configuration: Linear
• With Connector: No
• Voltage - Input: 24V
• Power - Input: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Other names: 350-2221

Example: 2 units total length = 23.15” [588.01]
11.7” x 1.498” x 0.585”
(297.18mm x 38.05mm x 14.86mm)
Mounting hole spacing = 3.22” [81.8mm].
Max screw size #8
Total length for “Z” units connected end to end =
(Z x 11.7) - ((Z-1) x 0.25) (inches)
(Z x 297.2) - ((Z-1) x 6.35) (mm)
Dialight reserves the right to make changes at any time in order to supply the best product possible.
www.dialight.com/Assets\Brochures_And_Catalogs\Illumination\MDEXLUMPWMLV.pdf
The most current version of this document will always be available at:
MECHANICAL DIMENSIONS
ASSEMBLY INFORMATION
IES 32 files available, consult factory
PHOTOMETRIC DATA
www.dialight.com
Top View
1) Remove cover from
module (Do not remove mask)
2) Connect
connect cables between modules as
indicated in the photo. If desired, insert
8/32 or M6 mounting screws in holes
provided.
3) Wire between cables may be routed
through end as indicated in photo or
around side of module.
4) Connect
of first module.
5) Replace cover.
6) Connect leads on
to low voltage power supply.
Red wire to +, black wire to -
Side View
LML6-LV-M2M-CAB
LML6-LV-CON-CAB
MDEXLUMPWMLV_C
LML6-LV-CON-CAB
quick
into front
2