LE B G3W-JAKA-23 OSRAM Opto Semiconductors Inc, LE B G3W-JAKA-23 Datasheet - Page 15

• Manufacturer Part Number: LE B G3W-JAKA-23
• Description: LED OSTAR PROJECTION BLUE
• Manufacturer: OSRAM Opto Semiconductors Inc
• Series: Ostarr
• Type: Without Connectorr

Specifications of LE B G3W-JAKA-23

• Color: Blue
• Luminous Flux @ Current - Test: 168 lm
• Current - Test: 4 x 1A
• Current - Max: 4 x 1A
• Driver Circuitry: No
• Voltage: 3.8V
• Wavelength: 464nm
• Configuration: Rectangle
• With Connector: Yes
• Voltage - Input: 3.8V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Power - Input: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: Q65110A7701

LE A G3W, LE T G3W, LE B G3W
Connecting and disconnecting OSRAM OS Ostar Projection modules
When connecting or disconnecting an Ostar Projection module care has to be taken in order to prevent
a damage of the module. The module is equipped with a male connector socket (JST SM 10B-SR
SS-TB). As a female connector for power supply a JST SHR-10V-S (without protrusions) or a JST
SHR-10V-S-B (with protrusions) with SSH-003T-P0.2 pins is recommended.
When disconnecting the connector the applied pull force must not exceed 17 N * (footnote * A force of
17 N can only be applied dynamically during disconnecting. No constant force must be applied to the
connector.) Disconnection of the module during operation or at high temperatures can damage the
module. The board temperature must not exceed 40°C during disconnection. During mating operation,
mate connectors while holding wires in a bundle on the same axis to the mating axis. For unmating wires
must be held in a bundle within 20 degrees to the mating axis (see Fig. for explanation).
Connector
20˚
Wire
PCB
20˚
20˚
Wire
Connector
PCB
OHO03020
2010-03-03
15