575SX1A48S103SS Honeywell Sensing and Control, 575SX1A48S103SS Datasheet - Page 14

• Manufacturer Part Number: 575SX1A48S103SS
• Description: POT 10K OHM COND PLAS LIN TAPER
• Manufacturer: Honeywell Sensing and Control
• Series: 575SSXr

Specifications of 575SX1A48S103SS

• Adjustment Type: Top Adjustment
• Resistance (ohms): 10K
• Power (watts): 0.25W, 1/4W
• Tolerance: ±20%
• Number Of Turns: Single
• Rotation: 300°
• Resistive Material: Conductive Plastic
• Termination Style: Through Hole
• Actuator Length: 19.05mm
• Actuator Type: Slotted Shaft
• Actuator Diameter: 6.35mm
• Package / Case: Square - 0.830" L x 0.830" W x 0.363" H (21.08mm x 21.08mm x 9.22mm)
• Resistance In Ohms: 10.0K
• Track Resistance: 10kohm
• Track Taper: Linear
• Resistance Tolerance: ± 20%
• Power Rating: 500mW
• Potentiometer Mounting: Panel
• No. Of Gangs: 1
• Temperature Coefficient: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 575SS103

TH100 Series
The TH-100 Series puts Honeywell’s proven variable-resistor technology to
work in angle-management applications such as control-lever sensing and
equipment position feedback. High performance and low cost make it
attractive for a wide range of applications. Special electrical and mechanical
configurations, including dual tracks, D-shape rotor holes, etc. are available on
special order.
The device provides for angle measurements, has 152,4 mm (6.0 in) wire
leads, a 6,35 mm (0.25 in) slotted thru hole and is sealed.
Power rating:
Element type:
Terminal type:
Shaft:
Body:
Electrical taper:
Storage & operating temperature:
Working voltage (max):
Linearity:
Total resistance:
Total resistance tolerance:
Rotational cycles:
OPTIONS
180° Rotation
TAPER
Linear
90° Rotation
TAPER
Linear
LINEAR AND ROTARY POSITION
Clarostat Rotary Position Transducers
110
6,35 mm (0.25 in) thru hole with .105 w x .090 d slot
CABLE CONNECTOR
CABLE CONNECTOR
No
No
38,1 mm (1.5 in) x 45,72 mm (1.8 in)
-40 °C to 120 °C (-40 °F to 248 °F)
± 5% standard; to ± 1% special
www.honeywell.com/sensing
Conductive plastic
REFERENCE
640CS103A06NAAY
REFERENCE
640ES103A06NAAY
three 20 AWG
0.5 W max.
> 1 million
350 Vdc
± 15%
Linear
10 K
HRS100 Series, Hall-effect
The HRS100 provides angular position information for a variety of sensing
and control applications in the automotive, marine, truck, off-road, industrial
implementation, aerospace, and rail industries. The use of magnetically
coupled information in place of a mechanical wiper assembly provides a long
life, cost-effective solution for harsh environments that include temperature,
vibration, dither, moisture and dirt.
This position sensor incorporates Hall-effect to provide a sensing device that
will last for more than 50 million operations. The device is packaged in a metal
housing with a 9,5 mm (0.375 in) diameter bushing and a 6,35 mm (0.25 in)
diameter slotted shaft and solder lug terminals.
Terminal type:
Bushing:
Shaft:
Body:
Electrical taper:
Operating temperature:
Supply voltage (max):
Linearity:
Rotational cycles:
Mechanical operating angle:
OPTIONS
90° Rotation
SHAFT
Slotted
22,23 [0.875]
GRD
Output
27,69 [1.09]
VDD
LUG
Straight Solder
2,84 [0.12]
13,2 [0.52]
Slotted 6,32 mm ± 0,03 (0.249 in ± 0.001)
9,52 mm (.375 in) FMS, includes C-ring
-40 °C to 85 °C (-40 °F to 185 °F)
Mounting Surface
19,05 [0.75]
20,32 [0.08]
27,79 mm (1.094 in) Ø
3.3 [0.13]
9,53 [0.375]
Straight solder lug
REFERENCE
HRS100SSAB090
10 million
Linear
5 Vdc
± 2%
90°