NMJ1209SAC Murata Power Solutions Inc, NMJ1209SAC Datasheet - Page 2

• Manufacturer Part Number: NMJ1209SAC
• Description: CONV DC/DC 1W 12VIN 9V SIP 5.2KV
• Manufacturer: Murata Power Solutions Inc
• Series: NMJr
• Type: Isolatedr

Specifications of NMJ1209SAC

• Output: 9V
• Number Of Outputs: 1
• Power (watts): 1W
• Mounting Type: Through Hole
• Voltage - Input: 10.8 ~ 13.2V
• Package / Case: 7-SIP Module (4 Leads)
• 1st Output: 9 VDC @ 111mA
• Size / Dimension: 0.77" L x 0.39" W x 0.49" H (19.6mm x 9.9mm x 12.4mm)
• Power (watts) - Rated: 1W
• Operating Temperature: -40°C ~ 60°C
• Efficiency: 73%
• Approvals: cUL, UL
• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 10.8V To 13.2V
• Power Rating: 1W
• Output Voltage: 9VDC
• Output Current: 111mA
• Approval Bodies: CURus
• Supply Voltage: 12V
• Product: Isolated
• Output Power: 2 W
• Input Voltage Range: 10.8 V to 13.2 V
• Input Voltage (nominal): 12 V
• Output Voltage (channel 1): 15 V
• Output Current (channel 1): 111 mA
• Isolation Voltage: 5.2 KV
• Output Type: Non-Isolated
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Details
• Other names: 811-1540-5

ISOLATION CHARACTERISTICS
Parameter
Isolation test voltage
Resistance
GENERAL CHARACTERISTICS
Parameter
Switching frequency
TEMPERATURE CHARACTERISTICS
Parameter
Specifi cation
Storage
Case Temperature above ambient
Cooling
TEMPERATURE DERATING GRAPH
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test
voltage, applied for a specifi ed time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions NMJ series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 5.2kVDC for 1 second.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
The NMJ series has been recognized by Underwiters Laboratory to 300Vrms for Supplementary Insulation and 150Vrms for Reinforced Insulation.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on
materials, construction and environment. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be
reduced by 20% from specifi ed test voltage.
SAFETY APPROVAL
www.murata-ps.com
The NMJ series has been recognised by Underwriters Laboratory (UL) to UL 60950 for supplementary insulation up to 300Vrms and reinforced insulation up to 150Vrms at a
maximum ambient temperature of 60ºC. File number E179522 applies.
RoHS COMPLIANCE INFORMATION
1.5
1.0
0.5
0
-40
Safe Operating Area
Ambient Temperature (ºC)
0
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300ºC for 10 seconds. The pin termination fi nish
on this product series is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The series is backward compatible with Sn/Pb soldering
systems.
For further information, please visit www.murata-ps.com/rohs
40
Conditions
Flash tested for 1 second
Viso= 500VDC
Conditions
Single output
Dual output
Conditions
All output types
All output types
Free air convection
60ºC
80
TOLERANCE ENVELOPE
+10%
+6%
V
NOM
10
25
Output Load Current (%)
50
75
Technical enquiries email: [e-mail], tel: [phone]
100
+2.5%
-4%
-7.5%
5.2kVDC Isolated 1W DC/DC Converters
TOLERANCE ENVELOPE, 3.3V in, 3V out type only
V
+9%
+1%
NOM
-7%
10
5200
Min.
Min.
Min.
-40
-55
25
Output Load Current (%)
2010-07-21 KDC_NMJ.G03 Page 2 of 6
Typ.
Typ.
Typ.
45
70
1
NMJ Series
50
Max.
Max.
Max.
75
130
60
33
100
-7%
+1%
-15%
Units
Units
Units
VDC
kHz
GΩ
°C