RP30-4805SFW Recom Power Inc, RP30-4805SFW Datasheet - Page 3

• Manufacturer Part Number: RP30-4805SFW
• Description: CONV DC/DC 30W SGL 5V OUT
• Manufacturer: Recom Power Inc
• Series: Powerline RP30-FWr
• Type: Isolatedr

Specifications of RP30-4805SFW

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 30W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 75V
• Package / Case: 6-DIP Module
• 1st Output: 5 VDC @ 6A
• Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
• Power (watts) - Rated: 30W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 88%
• Approvals: cUL, UL
• Brand/series: RP30-SF Series
• Configuration: Encapsulated
• Operation: Linear
• Power, Output: 30 W
• Primary Type: DC-DC
• Special Features: Efficiency to 87%; Single or Dual output;Remote On/Off and trim pins;Six-sided continuous shield
• Voltage, Input: 18-75 VDC
• Voltage, Output: 5 VDC
• 4: 1 Wide Input Voltage Range
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 30001085; 945-1277

Safety Standards
Thermal Cycling
Vibration
Conducted Emissions
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
MTBF calculated according to BELLCORE TR-NWT-000332
1. Typical values at nominal input voltage and no load/full load.
2. Typical values at nominal input voltage and full load.
3. Typical values at nominal input voltage and full load in vertical orientation and with Eurocard-sized PCB ground planes to assist in heat dissipation.
4. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
5. Requires an external 100µF/100V low ESR capacitor to meet EN61000-4-4 and EN61000-4-5
6. Case l: 50% Stress, Temperature at 50°C (Ground Benign).
7. To ensure a good all-round electrical contact, the baseplate is pressed firmly into place within the aluminium housing.The hydraulic press can leave
www.recom-international.com
POWERLINE+
DC/DC-Converter
Notes :
Recommended PCB Layout
Specifications
Input Fuse is recommended, but optional. Recommended fuse rating = double maximum input current, time delay type.
Input Capacitor, C1, is required to meet EN61000 Surge and Fast Transient, otherwise it is not required for normal operation.
Output Capacitors C2/C3 are recommended, but not required for normal operation. Typical capacitor values are 1µF/100V MLCC
To ensure optimum thermal performance, use large areas of copper on the PCB to assist with heat dissipation and mount the converter vertically.
For horizontal orientation, reduce the maximum temperatures by 10°C.
tooling marks and deformations to both the housing and baseplate. The case is anodised aluminium, so there will be natural variations in the case
colour and the aluminium is not scratch resistant. Any resultant marks, scratches and colour varations are cosmetic only and do not affect the
operation or performance of the converters.
(5)
Positive logic ON/OFF is standard, no suffix (Ex. RPP20-2405SW)
Negative logic ON/OFF option has suffix /N (Ex. RPP20-2405SW/N)
(5)
(typical at nominal input and 25°C unless otherwise noted)
Single Output
(6)
REV:2/2009
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
RPP20-S_DW
Series
Dual Output
10-55Hz, 12G, 30 Min. along X, Y and Z
complies with MIL-STD-810F
UL-60950-1 Pending
2195 x 10
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Perf. Criteria A
Class B
Class B
3
hours
PP-7