UEI15-150-Q12P-C Murata Power Solutions Inc, UEI15-150-Q12P-C Datasheet - Page 12

• Manufacturer Part Number: UEI15-150-Q12P-C
• Description: CONV DC/DC 16.5W 15V 1.1A
• Manufacturer: Murata Power Solutions Inc
• Series: UEI15r
• Type: Isolatedr

Specifications of UEI15-150-Q12P-C

• Number Of Outputs: 1
• Output: 15V
• Power (watts): 15W
• Mounting Type: Through Hole
• Voltage - Input: 9 ~ 36V
• Package / Case: 6-DIP Module
• 1st Output: 15 VDC @ 1.1A
• Size / Dimension: 1.10" L x 0.96" W x 0.32" H (27.9mm x 24.4mm x 8.1mm)
• Power (watts) - Rated: 16.5W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 85%
• Approvals: CSA, cUL, EN, UL
• Output Power: 16.5 W
• Input Voltage Range: 9 V to 36 V
• Input Voltage (nominal): 24 V
• Output Voltage (channel 1): 15 V
• Output Current (channel 1): 1.1 A
• Isolation Voltage: 2 KV
• Package / Case Size: 0.96 in x 1.1 in x 0.32 in
• Output Type: Isolated DC/DC Converters
• Output Voltage: 15 V
• Product: Isolated
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 811-1870-5

www.murata-ps.com
temperature gauges and no-contact IR camera mean that power supplies are
tested in real-world conditions.
gradients on each side. The adjustable heating element and fan, built-in
Both sides of the UUT are studied since there are different thermal
from others, possibly causing uneven overheating.
Isolated Wide Input Range 15-Watt DC/DC Converters
turbulence removes more heat from some surfaces and less heat
tive heat transfer characteristics and give false readings. Excess
Murata Power Solutions employs a custom-designed enclosed
vertical wind tunnel, infrared video camera system and test
instrumentation for accurate airfl ow and heat dissipation
analysis of power products. The system includes a precision low
fl ow-rate anemometer, variable speed fan, power supply input
and load controls, temperature gauges and adjustable heating
element.
Under Test (UUT) with both dynamic loads and static steady-
state conditions. A special optical port is used which is transpar-
ent to infrared wavelengths. The computer fi les from the IR
camera can be studied for later analysis.
down to a host carrier board for realistic heat absorption and
spreading. Both longitudinal and transverse airfl ow studies are
possible by rotation of this carrier board since there are often
signifi cant differences in the heat dissipation in the two airfl ow
directions. The combination of both adjustable airfl ow, adjustable
ambient heat and adjustable Input/Output currents and voltages
mean that a very wide range of measurement conditions can be
studied.
ment to make uniform temperature distribution. The collimator
also reduces the amount of turbulence adjacent to the UUT by
restoring laminar airfl ow. Such turbulence can change the effec-
The IR camera can watch thermal characteristics of the Unit
Both through-hole and surface mount converters are soldered
The airfl ow collimator mixes the heat from the heating ele-
Page 12 of 15