RP30-4805SEW/N Recom Power Inc, RP30-4805SEW/N Datasheet - Page 4

• Manufacturer Part Number: RP30-4805SEW/N
• Description: CONV DC/DC 30W 18-75VIN 05VOUT
• Manufacturer: Recom Power Inc
• Series: Powerline RP30-EWr
• Type: Isolated with Remote On/Off and UVLOr

Specifications of RP30-4805SEW/N

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 30W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 75V
• Package / Case: 8-DIP Module (7 Leads)
• 1st Output: 5 VDC @ 6A
• Size / Dimension: 2.00" L x 1.60" W x 0.40" H (50.8mm x 40.6mm x 10.2mm)
• Power (watts) - Rated: 30W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 88%
• Approvals: cUL, UL
• Product: Isolated
• Output Power: 30 W
• Input Voltage Range: 18 V to 75 V
• Input Voltage (nominal): 48 V
• Output Voltage (channel 1): 5 V
• Isolation Voltage: 1.6 KV
• Package / Case Size: 2 in x 1.6 in
• Output Voltage: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Details
• Other names: 30000702

P-78
POWERLINE
DC/DC-Converter
Specifications
Notes :
Package Style and Pinning (mm)
Conducted Emissions (see Note 10)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
MTBF (see Note 2)
1. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
8. Heat sink is optional and P/N: 7G-0011-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
9. The dual output required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage
10.See application notes for class B common mode filter suggestion.
RECOM suggest: Nippon chemi-con KY series, 220µF/100V, ESR 90m Ω.
(add suffix -HC). See Application Notes for heatsink details.
these devices, however they may not meet all listed specification.
Positive logic ON/OFF is standard, no suffix (Ex. RP30-2405SEW)
Negative logic ON/OFF is marked with suffix-N (Ex. RP30-2405SEW/N).
(typical at nominal input and 25°C unless otherwise noted)
REV: 1/2010
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
External Output Trimming
Output can be externally trimmed by using the method
shown below. ( ) for dual output trim.
See Application Notes for details.
RP30-S_DEW
Series
Pin Connections
Pin #
1
2
4 ^
5
6
7
8
Pin Pitch Tolerance ±0.35 mm
Single
No Pin
+Vout
CTRL
-Vout
+Vin
-Vin
Trim
www.recom-electronic.com
+Vout
Dual
CTRL
-Vout
+Vin
Com
-Vin
Trim
1315 x 10
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Class A
Class A
3
hours