AXA005A0X-SR Lineage Power, AXA005A0X-SR Datasheet - Page 11

• Manufacturer Part Number: AXA005A0X-SR
• Description: CONVERT DC/DC 0.75 5.5V @ 5A SMD
• Manufacturer: Lineage Power
• Series: Austin MicroLynx™r
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of AXA005A0X-SR

• Rohs Status: RoHS non-compliant
• Output: 0.75 ~ 5.5V
• Number Of Outputs: 1
• Power (watts): 27W
• Mounting Type: Surface Mount
• Voltage - Input: 10 ~ 14V
• Package / Case: 5-SMD Module
• 1st Output: 0.75 ~ 5.5 VDC @ 5A
• Size / Dimension: 0.80" L x 0.35" W x 0.29" H (20.3mm x 8.9mm x 7.2mm)
• Power (watts) - Rated: 27.5W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 89%
• Approvals: CSA, EN, UL, VDE
• Product: Non-Isolated / POL
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 555-1008-2

Data Sheet
October 1, 2009
Design Considerations
Output Filtering
The Austin MicroLynx
output ripple voltage and will meet the maximum output
ripple specification with 1 µF ceramic and 10 µF polymer
capacitors at the output of the module. However,
additional output filtering may be required by the system
designer for a number of reasons. First, there may be a
need to further reduce the output ripple and noise of the
module. Second, the dynamic response characteristics
may need to be customized to a particular load step
change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional capacitance at
the output can be used. Low ESR polymer and ceramic
capacitors are recommended to improve the dynamic
response of the module. For stable operation of the
module, limit the capacitance to less than the maximum
output capacitance as specified in the electrical
specification table.
LINEAGE
POWER
TM
12V module is designed for low
(continued)
10 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 5A output current
Austin MicroLynx
Safety Considerations
For safety agency approval the power module must be
installed in compliance with the spacing and separation
requirements of the end-use safety agency standards,
i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE
0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power module
has extra-low voltage (ELV) outputs when all inputs are
ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 6A in the positive
input lead
TM
12V SMT Non-isolated Power Modules:
.
11