SRAH-10J1500 Bel Fuse Inc, SRAH-10J1500 Datasheet
SRAH-10J1500
Specifications of SRAH-10J1500
Related parts for SRAH-10J1500
SRAH-10J1500 Summary of contents
Page 1
... 0. 2 Typical Part Number Efficiency Surface Mount 88% SRAH-10J150 83% SRAH-10J120 80% SRAH-10J100 Max Notes °C 125 °C Max Notes 2. Tested with simulated source 150 mA impedance of 500 nH MHz; with a 270 uF/16 V with ESR=0.018 50 mA ohm max, at 100 kHz at 25 ° ...
Page 2
... Settling Time Overshoot 100% ~ 50% Max Load Settling Time Note: All specifications are typical at nominal input, full load at 25 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Min Typ Vo=1.5 V 1.470 V 1.5 V Vo=1 ...
Page 3
... Vnom 1.5 V 49.788 1.2 V 31.241 1.0 V 11.029 Vout Module Trim GND Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Min Typ 85% 88% 83% 86% 79% 82% 250 kHz 300 kHz 350 kHz ...
Page 4
... Output Current (A) xRAH-10J150 Thermal Derating Curve Note: Derating curve is for 1.2 V output and tested at nominal input voltage. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 2.25 V 2. Efficiency Curve 90.0% 88 ...
Page 5
... Ripple and Noise Waveforms Note: Ripple and noise with a 1uF ceremic capacitor at the output, Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Ripple and Noise at max Load 1.0 Vdc Output Ripple and Noise at max Load 1 ...
Page 6
... Transients 100% to 50% load 1.5 Vdc output Note: Transient response at 2.5 V input, di/dt=0.5 A/uS, with 220 uF tantalum cap at the output, Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Transients 50% to 100% load 1.0 Vdc output Transients 50% to 100% load 1 ...
Page 7
... NON-ISOLATED DC/DC CONVERTERS 2.5 Vdc Input 0.9 Vdc - 1.65 Vdc/10 A Outputt Mechanical Outline SRAH-10Jxx0 VRAH-10Jxx0 bel RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. These parts are not however compatible with the higher temperatures associated with lead free solder processes and must be soldered using a reflow profile with a peak temperature of no more than 240 º ...